Return to the Cloudy Nights Telescope Reviews home page


Telescope Specific Forums >> Meade ETX

Pages: 1
Rusty G
member
*****

Reged: 12/01/07
Posts: 66
Loc: Hueytown, Alabama
Dew shield cap
      #3385072 - 10/12/09 10:18 AM Attachment (14 downloads)

I noticed meade doesn't sell a cap for the meade dew shield. Looked around Walmart and really didn't find anything that would work. I ordered what's called a lens hood or hoodie from Adromada Camara. I got the 4.25-4.75 inch size for my 5 inch etx 125. Fits nice and snug. Only cost about 12 dollars. I also bought some velcro with the peel and stick back from Walmart and put a strip around the top of each leg to hang the controller. I noticed their's like an open slot on the belly of the tube of the etx. Down on the eyepiece end. It's about a quarter inch wide and maybe 2 inches long. Looks like dust, pollen etc could get in the optics. Is that open slot their for a reason ? I put tape over mine....Thanks

Edited by Rusty G (10/12/09 10:40 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
3 registered and 6 anonymous users are browsing this forum.

Moderator:  Shadowalker, oldsalt 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 191

Jump to

CN Forums Home



Cloudy Nights Sponsor: Astronomics