Click here if you are having trouble logging into the forums
Privacy Policy |
Please read our Terms
of Service | Signup and
Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User
rodney
Vendor - Explora Dome
   
Reged: 03/08/05
Posts: 812
Loc: Asbury, NJ
|
|
OK gang. Enough people have asked and the answer is as when the very popular 8 foot Explora Dome was introduced!!!! INTRODUCTION pricing.
Attached is the manner to get on board for the intro pricing. Keep in mind nothing will be charged to the end user until the quota is filled. So if only 5 people say they want it then it will most likely not happen. On the other hand, if 15 people say lets do it then that is another story. As it stands now it will not take much more effort to make this bigger Explora Dome a reality.
Here is where and what needs to be done from potential buyers:
If you are interested in Purchasing the ED II (MAxED) please fill out the form on our website www.explora-dome.com (upper left corner wher ethe pricing is located)
At this time you are only expressing an interest in purchasing the ED II.
Estimated Retail Price of $5500.00. The Cost of the Dome, the wheel kit, and the Mounting Ring, $5500.00 Retail
Early Bird Committers (SPECIAL PRICING) will be $3200.00 and would only need a deposit of $750.00 when the time comes .
I will set December 31st as the deadline for Go or No Go if we go ahead than we will set Jan 31st as the dead line for deposits to be made and if all deposits are made the production of the mold will begin. Once the parts are made we will have several people do quick testing to make sure that everything is working in principal and we do not see any major problems in the design. Then we will start to ship out product. All this should be in the 6-8 month window, barring any concerns, if at that time we have run into any concerns that will take quite awhile to overcome the customers would be able to request a refund.
The building I will be making roof panels for will be 166" Square the Horizon will be 26 - 28" above the wall height. A building 12 X 12 Would not need special roof panels just a little corner covering . The Horizon would be about 12" above the wall height.
I hope this answers the questions so far. If not please PM me or contact me off list.
Clear skies and Thank you for your support,
-------------------- Explora Dome information can be found here:
www.exploradome.us
Rodney
Meade 10 SCT
AT 8/F4 imaging scope
13 Truss
C8-NGT
Orion 80mm/F11
Canon 300D
Canon XSi
Two AS-GT mounts
Extremely happy Explora Dome home observatory owner
Edited by rodney (10/29/09 07:58 PM)
|
rodney
Vendor - Explora Dome
   
Reged: 03/08/05
Posts: 812
Loc: Asbury, NJ
|
|
Good evening folks, The response so far is moving along very nicely. A small favor, please mention this Cloudy Nights AD when place your order.
Clear skies,
-------------------- Explora Dome information can be found here:
www.exploradome.us
Rodney
Meade 10 SCT
AT 8/F4 imaging scope
13 Truss
C8-NGT
Orion 80mm/F11
Canon 300D
Canon XSi
Two AS-GT mounts
Extremely happy Explora Dome home observatory owner
|
Tom Schumann
member
Reged: 02/07/07
Posts: 23
Loc: Wake, Virginia
|
|
Does that give us more discount
--------------------
EXPLORA-DOME II (Early Bird Committer)
Orion Atlas 10 EQ-G Reflector
"Award Winning" Orion SkyView Deluxe 6 EQ Reflector
Orion Stratus Eyepieces
Orion UltraView 10x50 WA Binoculars
|
rodney
Vendor - Explora Dome
   
Reged: 03/08/05
Posts: 812
Loc: Asbury, NJ
|
|
One never knows what it will bring. It certainly would not hurt to mention CN when placing your order.
More new product news pending!! Proud to be Made in the 
Clear skies,
-------------------- Explora Dome information can be found here:
www.exploradome.us
Rodney
Meade 10 SCT
AT 8/F4 imaging scope
13 Truss
C8-NGT
Orion 80mm/F11
Canon 300D
Canon XSi
Two AS-GT mounts
Extremely happy Explora Dome home observatory owner
|
|
3 registered and 3 anonymous users are browsing this forum.
Moderator: Don W, BCB
Print Thread
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Thread views: 219
|
|
|
|
|
|
|