Click here if you are having trouble logging into the forums
Privacy Policy |
Please read our Terms
of Service | Signup and
Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User
Ed Jones
Pooh-Bah
  
Reged: 04/06/04
Posts: 1413
Loc: Sin-sin-atti
|
|
Arpruss, Synchronous motor speed is determined by the line frequency. I don't need variable speed because the tracking speed is correct. If I were doing photography then I would use the variable frequency inverter mentioned above but then you would need a second axis motor too.
-------------------- Ed Jones
|
salies
member
Reged: 08/10/09
Posts: 31
Loc: catalogne france
|
|
hola ed! you work is very good for me! j am envoy see your build congratulations!!!!
-------------------- sempre andavant ,mai morirem !
|
arpruss
scholastic sledgehammer
   
Reged: 05/23/08
Posts: 838
Loc: Waco, TX
|
|
Ed:
How thick is the maple ply that you used?
I am still in the planning stages. What I really like about this design is that it doesn't use a single-point south bearing like most of the other designs on the net. For my scope with a 25.5" high COG and about latitude 30, a single-point south bearing would require a ridiculously long platform--about 58" long.
-------------------- Coulter Odyssey 13.1" split-tube
Coulter Odyssey 8"
Home-made 7.8" F/4 dobsonian travel scope
Home-made 68mm F/5.3 achro (typically used as finder on 13.1")
Skymaster 15x70
BPTs4 8x30
32mm Plossl, 30mm Rini, 27mm Kellner, 13mm Hyperion, 6mm TMB/BO Planetary, Owl 2X Barlow
Palm TX with AstroInfo and RescoViewer
|
Ed Jones
Pooh-Bah
  
Reged: 04/06/04
Posts: 1413
Loc: Sin-sin-atti
|
|
I use some old maple wooden flooring 3/8 thick and doubled it to 3/4.
-------------------- Ed Jones
|
arpruss
scholastic sledgehammer
   
Reged: 05/23/08
Posts: 838
Loc: Waco, TX
|
|
Does anyone have any spreadsheet for the measurements? I made one (I'll post a link once I know it works) but I'd like to double check its calculations against someone else's before I start to cut.
-------------------- Coulter Odyssey 13.1" split-tube
Coulter Odyssey 8"
Home-made 7.8" F/4 dobsonian travel scope
Home-made 68mm F/5.3 achro (typically used as finder on 13.1")
Skymaster 15x70
BPTs4 8x30
32mm Plossl, 30mm Rini, 27mm Kellner, 13mm Hyperion, 6mm TMB/BO Planetary, Owl 2X Barlow
Palm TX with AstroInfo and RescoViewer
|
|
10 registered and 7 anonymous users are browsing this forum.
Moderator: Don W, Mike I. Jones
Print Thread
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Thread views: 2585
|
|
|
|
|
|
|