Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
Parker Fly
member


Reged: 02/19/09

ioptron cube -g help
      #3986624 - 08/16/10 04:45 PM

I have an Ioptron smartstar -g series mount. I had trouble the other night after slewing to the moon. The tracking was set to land. I put it back in park position turned it off then back on. Tracking worked fine and auto set to lunar tracking. Later I slewed to Alberio. Tracking worked fine auto in celestial mode. After a short break I went back to the scope and noticed it had once again set itself to land. The break was long enough that the control had powered down - something I had never noticed it doing before. Of course Alberio was long gone and I had to realign. Is this just the nature of this beast or do I have something set wrong in the menu structure? Hope this is enough info.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
11 registered and 28 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 427

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics