Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1 | 2 | (show all)
mich_al
Carpal Tunnel
*****

Reged: 05/10/09

Loc: Rural central lower Michigan ...
Re: CGEM new [Re: nemo129]
      #4352631 - 01/31/11 10:30 AM

I've used a small handcart to move the CGEM mount & tri-pod (OTA removed) in and out of the house with the legs moved together. Later I got a set of 'ScopeRollers' http://www.scoperoller.com/casters.shtml and just rolled the mount and tri-pod in & out.

Post Extras: Print Post   Remind Me!   Notify Moderator  
anivision
member


Reged: 05/09/09

Loc: Sweden
Re: CGEM new [Re: mich_al]
      #4352788 - 01/31/11 11:25 AM

Have you concidered the iOptron IEQ45 as its mount weight according to there website is only 25 lbs?
The payload is pretty much the same as the CGEM.


Post Extras: Print Post   Remind Me!   Notify Moderator  
DonH
member
*****

Reged: 09/22/09

Loc: Houston, Tx.
Re: CGEM new [Re: nemo129]
      #4354088 - 01/31/11 08:13 PM

Or , you could go into any Wallymart and go to the crafts aisle and pick up a stencil kit for 1.95 which has three sheets of 1/32 HDPE in I think 5x7 size. Perfect fit after cutting round.

Don


Post Extras: Print Post   Remind Me!   Notify Moderator  
nemo129
Post Laureate
*****

Reged: 01/03/10

Loc: WMass
Re: CGEM new [Re: DonH]
      #4356044 - 02/01/11 04:12 PM



Post Extras: Print Post   Remind Me!   Notify Moderator  
Ad Astra
professor emeritus
*****

Reged: 05/12/10

Loc: Riverside Co., California
Re: CGEM [Re: nemo129]
      #4358328 - 02/02/11 02:40 PM

Quote:

...or, you could just take an empty 1 gallon plastic milk jug, cut a flat side off and trim it to the size you need to make the donut for the top of the tripod. It functions very well as a slipsheet, costs you nothing, and you recycled!




+1 for recycling the HDPE in milk jugs! Cheap, available, rugged, easily replaced.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | (show all)


Extra information
25 registered and 42 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 3191

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics