Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
tr4driver
journeyman


Reged: 03/26/11

Using Sky Vector to fine tune polar alignment
      #4482128 - 03/29/11 12:39 PM

Greetings everyone.

I hope I'm posting this in the correct forum. I have a Meade fork mounted 8" SCT with a Lumicon Sky Vector computer and encoders. I had always assumed that the Lumicon and the JMI (NGC-MAX) computers were the same; however, I recently came across instructions for the JMI system that included a section on how to use it to precisely set the polar alignment of the scope. Apparently there's a menu item specifically for this in the JMI computer that does not appear to be in the Lumicon computer.

Basically, the process is a follows:

1. Set computer to EP (perfect polar alignment)
2. Polar align scope
3. Turn computer on and use the 'STAR FIX' command to align with a star
4. Select the 'POLAR ALIGN' command

At this point, the computer will guide the scope to Polaris. When the guide is complete, you adjust the altitude and azimuth of the scope to bring Polaris into the center of the eyepiece (if it's not already there), then repeat the process until there's no error.

Now finally my question - Is there any reason why I couldn't do the same thing without the special menu command? I could simply select 'GUIDE MODE' (to Polaris) after my 'STAR FIX' and adjust altitude and azimuth, reset the computer and start over until after the initial 'STAR FIX' I get no error when guiding back to Polaris.

This all assumes that I'm using a single star to initially fix the position.

I would greatly appreciate any help/comments.

Thanks,

Kurt


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
20 registered and 43 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 393

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics