Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
tomo
professor emeritus
*****

Reged: 06/14/10

Loc: Shelby Twp, Mi
Loading effect on PEC analysis
      #4547269 - 04/27/11 08:52 AM

Hi,

I have a CGE that has performed quite well. I'm in the process of resetting my PEC after some small mods. My normal configuration is to load this mount to it's max with a C-11 and TMB92L and attempt to do AP.
I'm using PEMPRO as it is superb, but my question to the mount expert community here is this;

- Should I do the PEC training and adjustment with the lowest possible load, just the refractor on my mount with toucam and 2x barlow or would i be better of setting it up to its operating load first?

My instinct tells me that because i'm trying to get a portrait of the gear fundamentals then having a lighter load will prevent and overlay of non-PEC residuals.

Thoughts?

Thanks,
Tommy


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
22 registered and 39 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 369

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics