Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
bigwooly
member
*****

Reged: 04/20/11

iOptron SmartStar Cube-e series help
      #4572886 - 05/10/11 08:44 AM

I recently got one of these tripods for $89.00 so far i'm fairly well pleased with it. However the star alignments are always miles off when i get to setup at a new site. Then sometimes after i've gotten the star in the EP and am getting ready to hit enter to accept the alignment the mount will go nuts and just start running away from the star when i'm not even touching the keypad.

This mount has the 8403 hand controller which isn't upgradeable or flashable. That is based on the info i've been able to dig up.

Does anyone have any experience with this mount or with this issue?

The other question i have is can i guide this mount with something other than it's hand controller it has two input jacks on the side of the mount.

Is there a PC cable available for these to allow guiding from the pc?


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
28 registered and 55 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 787

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics