Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User
You are not logged in. [Login] Entrance · Main Index · Search · New user · Who's Online
FAQ · Calendar

Equipment Discussions >> Mounts
Previous thread Previous   Index   Next thread Next   Threaded Mode Threaded  

Pages: 1
maxwolfie
super member


Reged: 07/06/10

GSO Dob knob coming loose
      #5420234 - 09/13/12 11:40 PM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

I have an 8" GSO Dob, I have a problem where if I rotate the Dob counter-clockwise, it will bring the tension handle with it and hence make the scope very sloppy and difficult to use. Rotating it clockwise is not an issue as it will essentially tighten it rather that loosen it.

Does anyone have any ideas for a quick fix?

Post Extras: Print Post   Remind Me!   Notify Moderator  
dodgerm37
member


Reged: 02/10/12

Loc: N.E Ohio, USA
Re: GSO Dob knob coming loose new [Re: maxwolfie]
      #5420720 - 09/14/12 10:45 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

maxwolfie, If there is a roller bearing under the tension knob it may need cleaned and a LITTLE lubrication. If the bearing is not moving freely it will cause the knob to loosen when the base rotates in that direction. Bob

Post Extras: Print Post   Remind Me!   Notify Moderator  
maxwolfie
super member


Reged: 07/06/10

Re: GSO Dob knob coming loose new [Re: dodgerm37]
      #5423319 - 09/16/12 07:00 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Thanks Bob, the whole thing is brand new though so I'm thinking perhaps I've put it together wrong?



Edited by maxwolfie (09/16/12 07:01 AM)

Post Extras: Print Post   Remind Me!   Notify Moderator  
maxwolfie
super member


Reged: 07/06/10

Re: GSO Dob knob coming loose new [Re: maxwolfie]
      #5454557 - 10/04/12 03:56 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

It turns out that for some reason the ball bearings were cutting a "race" into the washers, which I guess is causing a lot of binding.

Are there any options for a complete tension knob/bearing replacement? Don't really want to stuff around with it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
maxwolfie
super member


Reged: 07/06/10

Re: GSO Dob knob coming loose new [Re: maxwolfie]
      #5456070 - 10/05/12 03:19 AM
Edit post Edit   Reply to this post Reply   Reply to this post Quote Quick Reply: Quick Reply  

Bump

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1

Previous thread Previous   Index   Next thread Next   Threaded Mode Threaded  

Extra information
17 registered and 17 anonymous users are browsing this forum.

Moderator:  Bowmoreman, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 505

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics