Return to the Cloudy Nights Telescope Reviews home page


Telescope Specific Forums >> NexStar GPS / CPC Telescopes

Pages: 1 | 2 | (show all)
7of 9
super member
*****

Reged: 07/20/08

Loc: Valley Forge, PA USA
Re: Problem attaching cpc to tripod; taking too long. [Re: skypilgrim]
      #5520475 - 11/15/12 01:51 AM

I own a 11 GPS old model ( Steel ball bearings) I had the same problem with aligning the screws to the base. I call a old friend in Maryland, he immediately recommended a Starizona landpad. The moment I put it on my scope I drop the scope on the base, rotate the bottom of the scope you hear a click... done thread the screws on. You will have to buy longer screws, but it is the best investment you will make. Takes me 90 seconds and it's done!

try this link

http://starizona.com/acb/Landing-Pad---NexStar-GPS-New-Style-Silver-Tripod-P1...

Good luck,
Rachel


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | (show all)


Extra information
2 registered and 10 anonymous users are browsing this forum.

Moderator:  BRisley 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 1866

Jump to

CN Forums Home




Cloudy Nights Sponsor: Astronomics