Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Astrophotography and Sketching >> DSLR & Digital Camera Astro Imaging & Processing

Pages: 1
WhitenerJ
professor emeritus


Reged: 02/06/12

Loc: Waxahachie, Texas
IDAS LPS woes?? new
      #5546346 - 11/29/12 10:02 PM

Blah!! having issues with my new IDAS Light pollution filter. When it's in the imaging train it causes reflections of bright stars to the upper right of the star. Also did it with Jupiter. Also the colors are all split into 3 separate channels and there is a strong color gradient in the subs. Without the filter there are no reflections or gradients. Wondering if there is a better filter like the CLS clip in? Anyone else using a refractor and having issues like this with the IDAS 2" LPS-P2?

Jason


Post Extras: Print Post   Remind Me!   Notify Moderator  
WarrenS
Carpal Tunnel


Reged: 03/04/08

Loc: Orange County New York
Re: IDAS LPS woes?? new [Re: WhitenerJ]
      #5546502 - 11/30/12 12:17 AM

Sorry to hear about your reflection issues. I'm also using the 2" IDAS filter, screwed into my AT field flattener. Haven't noticed any unwanted reflections with either my 127mm or 80mm refractors. Where exactly in your imaging train is the filter? Some of the resident experts will have to weigh in on the gradient issue, I haven't noticed any additional or unusual gradients.

Post Extras: Print Post   Remind Me!   Notify Moderator  
mmalik
Postmaster
*****

Reged: 01/13/12

Loc: USA
Re: IDAS LPS woes?? new [Re: WhitenerJ]
      #5546508 - 11/30/12 12:26 AM

I use it in this... format with a refractor and have never had any issues. Most images I have been posting lately were taken with this setup. I am quite sure issue is not the filter; keep looking, will get sorted out soon and with feedback from other folks.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Silicon Owl
Pooh-Bah
*****

Reged: 11/25/05

Loc: Waimea, Hawaii 20N
Re: IDAS LPS woes?? new [Re: mmalik]
      #5546570 - 11/30/12 01:35 AM

No problem here, but at the front of my TV field flattener it is a long way from the focal plane and unlikely to cause visible internal reflections. We have low pressure sodium streetlights throughout the neighborhood and the filter is indispensible.

Post Extras: Print Post   Remind Me!   Notify Moderator  
WhitenerJ
professor emeritus


Reged: 02/06/12

Loc: Waxahachie, Texas
Re: IDAS LPS woes?? new [Re: Silicon Owl]
      #5546717 - 11/30/12 07:10 AM

I have the Idas screwed into the AT field flattener at the end that goes into the focuser.

Jason


Post Extras: Print Post   Remind Me!   Notify Moderator  
mmalik
Postmaster
*****

Reged: 01/13/12

Loc: USA
Re: IDAS LPS woes?? new [Re: WhitenerJ]
      #5546734 - 11/30/12 07:31 AM

Just as a 'test', take an image without FF (just the camera & filter) and see how it looks. Thx

Post Extras: Print Post   Remind Me!   Notify Moderator  
WarrenS
Carpal Tunnel


Reged: 03/04/08

Loc: Orange County New York
Re: IDAS LPS woes?? new [Re: WhitenerJ]
      #5546923 - 11/30/12 10:22 AM

Quote:

I have the Idas screwed into the AT field flattener at the end that goes into the focuser.

Jason




Can you post a sample image of the reflections? Maybe try to exchange the filter for another one?


Post Extras: Print Post   Remind Me!   Notify Moderator  
WhitenerJ
professor emeritus


Reged: 02/06/12

Loc: Waxahachie, Texas
Re: IDAS LPS woes?? new [Re: WarrenS]
      #5546985 - 11/30/12 11:10 AM

Here is a sample. Notice the reflection to the upper right of the star.



Post Extras: Print Post   Remind Me!   Notify Moderator  
WhitenerJ
professor emeritus


Reged: 02/06/12

Loc: Waxahachie, Texas
Re: IDAS LPS woes?? new [Re: WhitenerJ]
      #5547028 - 11/30/12 11:41 AM

Oh and this is the second idas filter and both do the same.

Jason


Post Extras: Print Post   Remind Me!   Notify Moderator  
David PavlichAdministrator
Transmographied
*****

Reged: 05/18/05

Loc: Mandeville, LA USA
Re: IDAS LPS woes?? [Re: WhitenerJ]
      #5547041 - 11/30/12 11:50 AM

I have mine at the end of the flattener with no problem.

Edit: Forgot to mention that for a DSLR, I always used the clip in version with very good results.

David

Edited by David Pavlich (11/30/12 11:59 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Tonk
Postmaster
*****

Reged: 08/19/04

Loc: Leeds, UK, 54N
Re: IDAS LPS woes?? new [Re: David Pavlich]
      #5547451 - 11/30/12 04:07 PM

Sounds very much like the planar surface of your filter is tilted a tiny amount to the axis of your optical train.

This gives both gradients and off axis reflections. Because these filters are a series of layers there are minor internal reflections between the layer interfaces - these only show up with very bright objects. If the filter is not tilted then these reflections travel back and forth in the same axis as the incoming rays and you should not see them - tilt the filter and the reflections cascade off to one side getting fainter as you move outwards

It could be the filter is misaligned (tilted) in its cell. The tilt is very slight.


Post Extras: Print Post   Remind Me!   Notify Moderator  
mmalik
Postmaster
*****

Reged: 01/13/12

Loc: USA
Re: IDAS LPS woes?? new [Re: Tonk]
      #5547495 - 11/30/12 04:41 PM

Quote:

It could be the filter is misaligned (tilted) in its cell. The tilt is very slight.




I am quite skeptical of the tilt theory; two filters in a row will not behave the same or will have the same tilt. Could it be the flexure in the system causing it? One test would be to image something at zenith to get imaging train straight/vertical.


Post Extras: Print Post   Remind Me!   Notify Moderator  
WhitenerJ
professor emeritus


Reged: 02/06/12

Loc: Waxahachie, Texas
Re: IDAS LPS woes?? new [Re: mmalik]
      #5547500 - 11/30/12 04:44 PM

That's funny. The star was at zenith. So not that. I'm gonna get a clip on cls filter next and try that.



Jason


Post Extras: Print Post   Remind Me!   Notify Moderator  
lightyear44
Pooh-Bah
*****

Reged: 12/29/09

Loc: Ontario
Re: IDAS LPS woes?? new [Re: WhitenerJ]
      #5547523 - 11/30/12 04:55 PM

An IDAS filter inside my Canon camera.
Never any issues here.
Best of luck.
-David.


Post Extras: Print Post   Remind Me!   Notify Moderator  
WhitenerJ
professor emeritus


Reged: 02/06/12

Loc: Waxahachie, Texas
Re: IDAS LPS woes?? new [Re: lightyear44]
      #5547763 - 11/30/12 07:42 PM

Well I tried again tonight without the Field Flattener and no reflections or color separation!! So with the FF the Idas filter is causing this?? How can I operate without my FF??

Jason


Post Extras: Print Post   Remind Me!   Notify Moderator  
mmalik
Postmaster
*****

Reged: 01/13/12

Loc: USA
Re: IDAS LPS woes?? new [Re: WhitenerJ]
      #5547781 - 11/30/12 07:51 PM

Could try a different brand FF? Yes, pricey proposition.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Tonk
Postmaster
*****

Reged: 08/19/04

Loc: Leeds, UK, 54N
Re: IDAS LPS woes?? new [Re: mmalik]
      #5547849 - 11/30/12 08:47 PM

Quote:

I am quite skeptical of the tilt theory




Please feel free!

I've just been looking into this on a crude optical bench with a Astronomik filter and an objective lens and a red laser (standing in for a bright star).

Slightly tilting the filter does indeed cause a readily observable but fainter offset point relection to apear where the camera sensor would be placed. Slightly varying the very small degree of tilt affects the fainter reflection displacement. The plane of the tilt affects the displacement direction.

The reflection light path is due to a small percentage of laser light reflected back off the flat surface of the filter back up the tube towards the objective (this ray is now at a angle to the principle axis). Some of this light is then reflected back off the back surface of the objective back to the filter. Net result is a faint offset reflection arriving where the sensor would be. Note that when all rays are traced this reflection may be distorted and slightly out of focus due to the objective lens rear surface being curved - my experiment isn't saying the reflected image of a star will slill be a point as I've only been looking at single rays with this set up.

My idea that it was due due to internal reflections within the filter was wrong - but refections off the flat filter surface back onto other optical elements could certainly cause the OPs observed effect - my experiment confirms it is possible via a small tilt - assuming the scope is a refractor of course!!!

Can't be discounted by sceptism now that the experiment has been done ! However it may not be the actual cause - I suggest you play with a laser pointer - its a good diagnostic tool.


Post Extras: Print Post   Remind Me!   Notify Moderator  
fco_star
Carpal Tunnel
*****

Reged: 12/13/10

Loc: Texas, Midland
Re: IDAS LPS woes?? new [Re: Tonk]
      #5548011 - 11/30/12 10:59 PM

some times the lock bolt at the focuser could cause a flexure, try not to use it, maybe it will work for you.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
13 registered and 24 anonymous users are browsing this forum.

Moderator:  Dave M, WOBentley, tecmage 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 705

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics