Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
Steve Moon
member


Reged: 01/03/13

Orion Intelliscope
      #5626450 - 01/16/13 03:57 PM

Hi,
I have an Orion XT8i, push-to telescope.
Since the day I got my scope, I've been getting a bad azimuth reading.

My azimuth reading is NOT changing if I rotate the scope slowly. It seems it works when I rotate my scope fast as I see the numbers in the object locator change. However, when I move it slowly, it does not respond to the movement.

I contacted Orion and one of the technicians told me to use a 'non hardening caulk' between the triangular base (the bottom base) and the underside of the magnetic disk.

Does anyone know what the 'non hardening caulk' is? Is silicon can be a type of it?

Also, another question I have is whether the magnetic disk should not move when I rotate the scope cause the technician said 'It sounds like the problem is the magnetic disk is sometimes moving with the upper base.'

Clear skies!


Post Extras: Print Post   Remind Me!   Notify Moderator  
mmclure
professor emeritus
*****

Reged: 12/30/10

Loc: Sacramento, CA USA
Re: Orion Intelliscope new [Re: Steve Moon]
      #5626661 - 01/16/13 05:40 PM

The most common suggestion here on CN is to use double sided tape (the thin transparent stuff, not the foam type) between the magnetic disk and the base. Four pieces, placed evenly spaced around the perimeter of the disk should be enough.

This post goes into great detail on how to maximize the performance of your Intelliscope.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Steve Moon
member


Reged: 01/03/13

Re: Orion Intelliscope new [Re: mmclure]
      #5627023 - 01/16/13 09:08 PM

Thank you Manuel for a quick answer.
Also the link is really helpful, too.

Now I have some works to do


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
25 registered and 46 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 423

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics