Return to the Cloudy Nights Telescope Reviews home page

Astrophotography and Sketching >> CCD Imaging & Processing

Pages: 1 | 2 | (show all)

Reged: 01/19/13

Loc: LP Land
Re: Back to imaging - what to get? new [Re: Fogboundturtle]
      #5644932 - 01/26/13 07:10 PM

Thanks again guys. Just an update, I picked up an sbig st-8300 and my mount was being finicky, so, I did pick up a new mount. For the mount I went with an ioptron ieq45. I didn't get an OAG, i will stick with short FL scopes for now. i did get a zhumell 50mm guide-scope, to help keep the weight down on the IEq. That pretty much wiped out my budget for now. I do have a set of NB filters and lots of other filters. For software, I still have Maxim DL CCD and PixInsight, so, will use them for now. For scopes I will stick with the R200ss and WO 80mm that I already had. That should get me started. Now if the clouds would go away....

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1 | 2 | (show all)

Extra information
9 registered and 18 anonymous users are browsing this forum.

Moderator:  Oldfield, droid, Scott in NC, bilgebay, WOBentley 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Thread views: 1361

Jump to

CN Forums Home

Cloudy Nights Sponsor: Astronomics