Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Electronically Assisted Astronomy

Pages: 1
Vendor - Astrovideo Systems

Reged: 07/31/09

Loc: Brevard County , FL
Computer Control of Video Cameras - Codes and SW
      #5636511 - 01/22/13 09:51 AM

For any of you who wanted to control your cameras remotely from a computer or any device with a serial interface (be it rs232, rs485, 422 or just USB) , here are some control codes for Pelco-D cameras.
Important, all codes assume camera ID is set to 1 .
All codes are hex.

FF 01 02 00 00 00 03 - this opens the camera OSD menu and is also the code for the ENTER , OK or SELECT

FF 01 00 08 00 20 29 - UP button

FF 01 00 02 20 00 23 - RIGHT button

FF 01 00 10 00 20 31 - DOWN

FF 01 00 04 20 00 25 - LEFT

The Pelco-D protocol is sort of messy and there are multiple ways to accomplish the same commands. The above are just a small part.

If your camera is controlled by a different protocol, I found a piece of software that has multi protocol compatibility (Pelco-D , Pelco-P, Sony, various Samsung , Bosch , Linlin etc) :

This has the capability of software programmable buttons so you can assign them for functions you use frequently for astro video.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1

Extra information
4 registered and 5 anonymous users are browsing this forum.

Moderator:  droid, David Pavlich, JayinUT 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Thread views: 507

Jump to

CN Forums Home

Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics