Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
Sami
member


Reged: 03/03/10

Loc: Abu Dhabi, United Arab Emirate...
Help: iOptron GoToNova RS-232 instruction Set
      #5655585 - 02/01/13 04:44 AM

I have been developing a computer program on Linux to control the GotoNova 8401 Hand Controller. The commands
provided in iOptron documentations do not seem to be complete. They are very similar to Astro-Physics commands.

While I can change the longitude and latitude (commands ":Sg sDDD*MM:SS#" and "St: sDD*MM:SS") from the program, they are not saved (or used ?) and have to go to the controller to press enter to save them and then restart communication with the program.

I need the command to save these two setting to the active ram.

Any Help is appreciated,

Sami


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
11 registered and 28 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 318

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics