Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
George P Dunham
super member


Reged: 06/24/12

Loc: Pinecliffe,CO USA
After a period of non-use?
      #5658329 - 02/02/13 03:13 PM

I have had my CGE Pro mount outside since Summer, due to back and knee issues. I am not planning to bring it in at all. I am hopping to get to it this spring. It is covered well in telagizmo 365. I am wondering if I need to prep it with gear lube or any other preliminary work or just power up and get to using it? Perhaps a silly question but it doesn't hurt to ask.

Post Extras: Print Post   Remind Me!   Notify Moderator  
EFT
Vendor - Deep Space Products
*****

Reged: 05/07/07

Loc: Phoenix, AZ
Re: After a period of non-use? new [Re: George P Dunham]
      #5659976 - 02/03/13 01:14 PM

You can't really lube anything without taking the mount apart. It is not likely that you will have a problem when you start it up though. I would just turn it on and without going through any alignment, try slewing the axes (it will slew at maximum speed automatically). Just listen to the mount and it will tell you if there is a problem. If an axis refuses to move, then do not continue to press the direction button as that could result in burnt out components.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
19 registered and 39 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 290

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics