Return to the Cloudy Nights Telescope Reviews home page


Speciality Forums >> Astronomy Software & Computers

Pages: 1
kljw
member


Reged: 01/24/13

Loc: Scotland
LX200 GPS and PHD Guiding new
      #5661622 - 02/04/13 12:01 PM

Hi
not sure if this is the correct section, but i am trying to find out how to connect my LX200 with PHD Guiding Software, can anyone help?
have down loaded the LX200GPS driver, but get stuck at this point.

many thanks
Keith


Post Extras: Print Post   Remind Me!   Notify Moderator  
rmollise
Postmaster
*****

Reged: 07/06/07

Re: LX200 GPS and PHD Guiding [Re: kljw]
      #5661645 - 02/04/13 12:16 PM

If you have a camera with a guide output or have a Shoestring adapter, no drivers are needed. You guide through the autoguider port on the scope, not the serial port.

IOW, if you are using the autoguide port on the control panel, you do not use serial cables or drivers; just an ST4 cable connected to the camera's guide output.

Edited by rmollise (02/04/13 12:17 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
1 registered and 19 anonymous users are browsing this forum.

Moderator:  richard7, kkokkolis 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 348

Jump to

CN Forums Home




Cloudy Nights Sponsor: Astronomics