Return to the Cloudy Nights Telescope Reviews home page


Telescope Specific Forums >> Meade Computerized Telescopes

Pages: 1
peterloron
newbie


Reged: 03/10/13

ETX125 Fork cover?
      #5725914 - 03/11/13 01:54 PM

My ETX125EC has a problem with the declination drive. I took the OTA out of the forks and disassembled the fork with the motor. The outer shell (which the motor/gear assembly mounts to) has most of the mounting points broken off.

Anybody have a spare fork body?


Post Extras: Print Post   Remind Me!   Notify Moderator  
peterloron
newbie


Reged: 03/10/13

Re: ETX125 Fork cover? new [Re: peterloron]
      #5725981 - 03/11/13 02:27 PM

Well, I just called Meade and they won't sell that part. I really don't want to fork out $165+shipping just to have them replace a $5 plastic shell. <grumble>

Post Extras: Print Post   Remind Me!   Notify Moderator  
Christopher EricksonModerator
Carpal Tunnel
*****

Reged: 05/08/06

Loc: Waikoloa Village, Hawaii
Re: ETX125 Fork cover? new [Re: peterloron]
      #5726981 - 03/11/13 10:04 PM

Possibly you could take it apart and glue the broken pieces back together with Bondo or some other body filler.

You can also remove the OTA from the forks and put it on a different mount, like an iOptron Cube.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
3 registered and 14 anonymous users are browsing this forum.

Moderator:  Starman27, Christopher Erickson, Starman81 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 357

Jump to

CN Forums Home




Cloudy Nights Sponsor: Astronomics