Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Equipment

Pages: 1
sam81
member


Reged: 07/16/11

Screw sizes on Orion 80mm ED
      #5741110 - 03/18/13 04:42 PM

Does anyone know the size of the three allen screws on the Orion 80mm ED? These are the three screws that hold the adapter to the scope, on the back end. I tried looking at the specs of the scope and adapter, but it doesn't list the screw sizes. I need to replace one of them.

Thanks!


Post Extras: Print Post   Remind Me!   Notify Moderator  
Lane
Post Laureate


Reged: 11/19/07

Loc: Frisco, Texas
Re: Screw sizes on Orion 80mm ED new [Re: sam81]
      #5741356 - 03/18/13 06:25 PM

My Orion ED80 has philips head screws holding the adapter to the OTA.

Take one of the screws down to a hardware store and they can identify it in less than a minute.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
10 registered and 21 anonymous users are browsing this forum.

Moderator:  tecmage, rflinn68 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 211

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics