Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
obin robinson
Carpal Tunnel

Reged: 10/25/12

Loc: League City, TX
Did my first EQ mount tune. Found some shortcuts
      #5767359 - 03/30/13 06:28 PM

I did my first EQ mount tune today on my LXD-55 goto. I was at first intimidated because I have never taken apart an EQ mount. I was about to order the video from Deep Space Products then I realized something:

This task is about ten times easier than people make it out to be. This job is very similar to changing a nose wheel on an aircraft. It's all about cleaning up old grease and tightening parts just enough so things don't wobble or bind. The EQ tuning takes a bit of finesse but the difficulty is not high at all if you've ever changed a wheel and tire.

I read the instructions from astronomyboy about 3 times and then I decided to tackle the project. Here's the tools I used:

metric allen set
SAE allen set
precision screwdriver
needle nose pliers
lint free rags
old toothbrush

HAZMAT used:
Militec-1 grease. It's a grease version of the awesome Militec-1 firearm lubricant. This is the best stuff under the sun:
Militec-1 firearm lubricant. I lightly coated it to the bare metal before the abrasive was applied.
Mineral spirits

The abrasive I used to polish up the internals:
Norton Synthetic Steel Wool:

The shortcuts:
-Just look at the surfaces which contact against each other. Polish those ones. The rest are fine.
-A needle nose pliers works just fine in place of a spanner.
-When setting backlash and gear engagement tighten the worm down the entire way. Rotate it and every time you feel it bind loosen it up an insignificant amount until it stops binding. Once you can spin the gear around several times and it doesn't bind you are good to go.
-Use more grease than you think you will be needing. If you use Militec-1 you can glob it on and then wipe off the excess. Once you put everything back together spin it about 10-20 revolutions and you will fee it loosen up.

My LXD-55 is now silky smooth. The motors spin with a consistent wine and they don't struggle at all. Total time elapsed: 3 hours from start to finish. Next up is the Skyview Pro!

Now it's time to track some satellites!


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1

Extra information
25 registered and 31 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Thread views: 247

Jump to

CN Forums Home

Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics