Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
Daud
sage


Reged: 08/05/06

Loc: AZ, Scottsdale
Synscan lower line display failure new
      #5801846 - 04/16/13 12:54 AM

I dropped the handpad (Synscan for Orion Sirius mount) while ON and now the lower line is gone, only on second or third positon is a small vertical line (depends on what is depicted).
The handpad behaves normally, only with missing second line, the handpad is useless.
Maybe a connector got dislodged or a circuit broken ?

What are my options ?
- attempt for self repair if I open it and see some disconnect
- get the display module and try to replace it
- send the handpad to Orion (no warranty) or Skywatcher CAN
for repair
- get a new handpad (costly)
- something completely different

I am trying to take it with stride (the four peaks of the Theophilus center were breathtaking in the SuperMono and TMB 105) but am angry on myself for my haste..I have a velcro pads to position the handpad on the mount body but tried to put it on the eyepiece shelf..)


Post Extras: Print Post   Remind Me!   Notify Moderator  
KD58
sage
*****

Reged: 11/23/12

Loc: West Texas
Re: Synscan lower line display failure new [Re: Daud]
      #5802374 - 04/16/13 11:29 AM

Mine doesn't work and I just control the mount from my laptop using EQMOD. Basic controls can be through a game pad and goto can be replaced by a planetarium program such as CDC.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Daud
sage


Reged: 08/05/06

Loc: AZ, Scottsdale
Re: Synscan lower line display failure new [Re: KD58]
      #5802885 - 04/16/13 02:44 PM

I am Mac based, (MB Air and iPad), is EQMOD available ?
How do you do alignment ?
The controller is still functional, I would use it as an interface, I suppose..
Also have Sky Safari and Orion StarSeek wifi module, which I planned to use with this mount.


Post Extras: Print Post   Remind Me!   Notify Moderator  
rmollise
Postmaster
*****

Reged: 07/06/07

Re: Synscan lower line display failure new [Re: Daud]
      #5803035 - 04/16/13 04:31 PM

Have you opened the controller and checked the ribbon cable that connects to the board?

Post Extras: Print Post   Remind Me!   Notify Moderator  
Daud
sage


Reged: 08/05/06

Loc: AZ, Scottsdale
Re: Synscan lower line display failure new [Re: rmollise]
      #5803077 - 04/16/13 04:54 PM

Quote:

Have you opened the controller and checked the ribbon cable that connects to the board?




That is my plan for tonight..
Called Orion tech support, no call back after several hours. most likely they would offer a new one for $400.
Spoke with one Canadian Skywatcher dealer, if it is not the cable, he will facilitate an attempt for a repair with Skywatcher. Interesting also that the price for a new one here is a double of the Canadian price.


Post Extras: Print Post   Remind Me!   Notify Moderator  
KD58
sage
*****

Reged: 11/23/12

Loc: West Texas
Re: Synscan lower line display failure new [Re: Daud]
      #5803482 - 04/16/13 08:22 PM

Quote:

I am Mac based, (MB Air and iPad), is EQMOD available ?
How do you do alignment ?
The controller is still functional, I would use it as an interface, I suppose..
Also have Sky Safari and Orion StarSeek wifi module, which I planned to use with this mount.




I'm not sure about Mac v PC but EQMOD has an alignment routine. You can do a quick youtube search and there are several tutorials. It's quite neat really.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Daud
sage


Reged: 08/05/06

Loc: AZ, Scottsdale
Re: Synscan lower line display failure [Re: KD58]
      #5803850 - 04/17/13 01:45 AM Attachment (11 downloads)

The ribbon cable seats so firmly that I can't pull it out. However, I seem to see side cracks on the display panel, annotated by the arrows. I will ship it to Canada...

KD58, thanks for your suggestions. I want to use my recently purchased Starseek wifi, so would prefer the controller intact.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
18 registered and 30 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 499

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics