Return to the Cloudy Nights Telescope Reviews home page


Telescope Specific Forums >> Celestron NexStar

Pages: 1
JamesDouglas
member


Reged: 03/14/13

Stuck in Boot Mode new
      #5827391 - 04/27/13 10:05 PM

Greetings
I received a no response 16 error on my 8SE ( which I just purchased) and per nexstarsite.com I am attempting to reload my MC firmware. Alt is fine, but AZM is stuck in boot mode and the MCupdate reads mode/version: unknown. When I attempt to program the AZM I receive a warning "motor control unknown".

So it appears I cannot program the AZM while in boot mode? Is there a way to knock it out of boot mode? This is really frustrating...any help would be appreciated, but I have a feeling I am going to be down until I talk to Celestron

Thanks folks


Post Extras: Print Post   Remind Me!   Notify Moderator  
RTLR 12
Post Laureate
*****

Reged: 12/04/08

Loc: The Great Pacific NorthWest
Re: Stuck in Boot Mode [Re: JamesDouglas]
      #5827611 - 04/28/13 01:03 AM

What version HC do you have and which program are you using to update with?

If you have the new Nexstar+ HC with the Celestron Logo button at the lower left, then you need to use the Celestron Firmware Manager (CFM) program to do the update and not the older version HCupdate program.

Stan


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
3 registered and 14 anonymous users are browsing this forum.

Moderator:  Brian Risley, panhard, Mitchell Duke, mayidunk 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 306

Jump to

CN Forums Home




Cloudy Nights Sponsor: Astronomics