Return to the Cloudy Nights Telescope Reviews home page

Astrophotography and Sketching >> Film Astrophotography

Pages: 1

Reged: 07/25/10

Loc: Czech Republic, Central Europe
What error is this? new
      #6052991 - 08/29/13 05:22 PM

Is it an error of camera or of development? The lighter stripes appear only in one frame of the film. The frame is number 6 and the previous and following frames are also astrophotos. The camera was Pentax 6x7 with E200 film pushed 1 stop. Thanks for any suggestions.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Carpal Tunnel

Reged: 10/04/05

Loc: Squamish BC Moved!!!!!
Re: What error is this? new [Re: Michal1]
      #6053525 - 08/29/13 11:12 PM

Hmmmm. The film appears fogged like when my Hasselblad had a defective foam light gasket around the dark slide in one film magazine.

Post Extras: Print Post   Remind Me!   Notify Moderator  

Reged: 10/01/05

Loc: Lost In Space
Re: What error is this? [Re: Michal1]
      #6053777 - 08/30/13 03:44 AM

I would say it happened durring developing.
Looks like that area may been in the chemicals more/less than the other areas due to the fog (light area) going all the way across the film edge to edge through where the frame numbers are.
I cant think of any way to have light just hit that area of that frame in a fairly straight line.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1

Extra information
0 registered and 3 anonymous users are browsing this forum.

Moderator:  1965healy, WOBentley 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Thread views: 267

Jump to

CN Forums Home

Cloudy Nights Sponsor: Astronomics