Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> ATM, Optics and DIY Forum

Pages: 1
m1618
sage
*****

Reged: 09/18/12

Loc: Orange County - CA
60mm Refractor FL 432mm - where to place focuser new
      #6136199 - 10/14/13 01:40 AM

Recently got a classic Tasco 60mm with built-in erector/barlow for terrestrial viewing at a garage sale.
Calculated the FL to be 432mm (only to find it already advertised that way). Currently the tube is ~495mm.

How much would I have to cut to reach focus with adding a diagonal (and removing the existing inline elements)? Current focuser is ~55mm. Is there some rule of thumb to allow play of the draw tube? Thanks for any guidance.


Post Extras: Print Post   Remind Me!   Notify Moderator  
GlennLeDrew
Postmaster
*****

Reged: 06/18/08

Loc: Ottawa, Ontario, Canada
Re: 60mm Refractor FL 432mm - where to place focuser [Re: m1618]
      #6136264 - 10/14/13 03:28 AM

Once you have selected the components, the surest thing is to strap objective cell and focuser to a board and check for the best separation with the range of eyepieces, Barlow, etc., you'll be using. Just use a target a good kilometer or more distant.

Post Extras: Print Post   Remind Me!   Notify Moderator  
PhilHerring
super member


Reged: 12/06/09

Loc: -33.87800,151.19630
Re: 60mm Refractor FL 432mm - where to place focuser new [Re: m1618]
      #6138293 - 10/15/13 03:08 AM

Which model Tasco is it?

Post Extras: Print Post   Remind Me!   Notify Moderator  
m1618
sage
*****

Reged: 09/18/12

Loc: Orange County - CA
Re: 60mm Refractor FL 432mm - where to place focuser new [Re: PhilHerring]
      #6138608 - 10/15/13 09:17 AM

According to the kind folks over at the classic forums, it is a Tasco 5VTE. I should consolidate these posts

Found markings on and near what was calculated to be the 432mm focal...suggestive of the previous owner having thought of going down the same path.


Post Extras: Print Post   Remind Me!   Notify Moderator  
m1618
sage
*****

Reged: 09/18/12

Loc: Orange County - CA
Re: 60mm Refractor FL 432mm - where to place focuser new [Re: m1618]
      #6140278 - 10/16/13 04:20 AM

For reference and archive sakes:

http://www.cloudynights.com/ubbthreads/showflat.php/Cat/0/Number/6132650/page...

But from a DIY perspective... it was possible to cut through a 60mm tube with a little handsaw. 1 big error was that I had not measured from the bottom of the focuser thus I was off by several inches at first (I did use the wooden board suggestion though thanks! I just made the wrong marks). Imagine my sore hand from gripping that tube and sawing by hand, twice, in the middle of the night just to get first light! Crazy understands crazy. The way I see it, it was worth it to turn a Tasco from the 60's into an F7...now if I can just attach my DSLR... huh.


Post Extras: Print Post   Remind Me!   Notify Moderator  
PhilHerring
super member


Reged: 12/06/09

Loc: -33.87800,151.19630
Re: 60mm Refractor FL 432mm - where to place focuser new [Re: m1618]
      #6140319 - 10/16/13 06:09 AM Attachment (9 downloads)

Aah, yes. Here's a picture of mine. It was my first scope, given to me back at the start of the 1970s. I cut it down and added a .965" prism diagonal in the early 1980s. I see from that thread you linked to that I haven't been the only person to do this!

I believe that the FL of the objective in mine is actually about 400mm, measured to the field stop of my favourite eyepiece. I repurposed the original focuser as shown; the tube that houses the varifocal mechanism had a thread at one end that matched the thread for filters in the diagonal, so I cut the end off that, threaded it into the diagonal, and slid the result into the focuser.

Unfortunately, this focuser is way too narrow for this fairly short objective, so only the centre of the field is fully illuminated, making it less than perfect as an RFT. Ideally, you want a fairly short 1 1/4" focuser. A full-size diagram on paper will show you how much drawtube you can live with before it impinges on the edges of the field.

Edited by PhilHerring (10/16/13 06:11 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
10 registered and 17 anonymous users are browsing this forum.

Moderator:  ausastronomer, richard7, Starman81 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 294

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics