Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Mounts

Pages: 1
hpcdan
member


Reged: 08/15/11

Loc: Iowa City, IA
EQ6 with PEC and autoguiding
      #6147256 - 10/19/13 06:48 PM

If I use PECPrep or PEMPro to generate a PEC curve for the EQ6, it obviously reduces the periodic error of the mount. And, of course, I normally autoguide for all photos.

Here's my question: Can PEC training and autoguiding happily coexist on the EQ6? That is, if I autoguide after loading a PEC curve, what happens?


Post Extras: Print Post   Remind Me!   Notify Moderator  
telfish
sage
*****

Reged: 11/17/10

Loc: Adirondack Mountains NY
Re: EQ6 with PEC and autoguiding new [Re: hpcdan]
      #6148030 - 10/20/13 08:51 AM

I use eqascom and phd with my Atlas. And it will run a PEC curve and guide at the same time. Having PEC running means the guiding can be less intensive.

Eqascom will record it's own PEC curve and apply it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
18 registered and 41 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay, iceblaze 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 212

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics