Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
Get a Cloudy Nights T-Shirt Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu uh, User

Equipment Discussions >> Equipment

Pages: 1
john gabriel
sage
*****

Reged: 12/13/11

Loc: Southern California
help please - metric / optics equipment threads
      #6323779 - 01/20/14 10:14 AM Attachment (7 downloads)

Are "T" and "T2" threads just shorthand for M42 x .075 and M48 x 0.75? Please correct me.

I recently bought this focuser with M46 x 0.75 male thread. The M46 thread size seems almost non-existent in the literature and is not found in metric thread tables. I wonder if this a seller's typo, or did I buy a sub-standard product now being shipped all the way from China that won't fit into anything.

The problem is I've found at lease two (possibly 3) very similar focusers listed as M46 for guide scopes.

Would an M46 x .75 male thread into an M48 x 0.75 female? Is the M48 also called "T2"?

My humble thanks to anyone who can straighten me out on these confusions.
John

Edited by john gabriel (01/21/14 11:19 AM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Madratter
Post Laureate


Reged: 01/14/13

Re: help please - metric / optics equipment threads new [Re: john gabriel]
      #6323992 - 01/20/14 12:05 PM

Bumping this for you.

This should help.

http://en.wikipedia.org/wiki/T-mount

T2 is not M48. That is the threading used for 2" filters.


Post Extras: Print Post   Remind Me!   Notify Moderator  
john gabriel
sage
*****

Reged: 12/13/11

Loc: Southern California
Re: help please - metric / optics equipment threads new [Re: Madratter]
      #6324307 - 01/20/14 02:32 PM

Quote:



T2 is not M48. That is the threading used for 2" filters.




Meaning that both T and T2 are M42? I found the wiki article confusing.

I'm wondering if the focusers from China are either defective major thread dia. or if their sellers have just gotten into a repeated typo? There appears to be no such thing as an M46 in any of the metric tables I've looked at.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Madratter
Post Laureate


Reged: 01/14/13

Re: help please - metric / optics equipment threads new [Re: john gabriel]
      #6324318 - 01/20/14 02:42 PM

Strictly speaking, as the article indicates, not all T adapters are necessarily T2 and not all are necessarily M42. In terms of modern T adapters, my guess is that almost all are T2. But I'm not sure about that.

As for M46, I haven't heard of it, but I'm more inclined than not to think it is NOT a typo.

At any rate, I think you'll probably have better luck in the equipment forum with this question.


Post Extras: Print Post   Remind Me!   Notify Moderator  
john gabriel
sage
*****

Reged: 12/13/11

Loc: Southern California
Re: help please - metric / optics equipment threads new [Re: Madratter]
      #6324356 - 01/20/14 03:07 PM

Thank you! I will probably just copy over the original question and then edit. (I guess I could ask the moderator to move the thread - dunno?)

Thanks again.
John


Post Extras: Print Post   Remind Me!   Notify Moderator  
john gabriel
sage
*****

Reged: 12/13/11

Loc: Southern California
Re: help please - metric / optics equipment threads new [Re: john gabriel]
      #6326432 - 01/21/14 03:30 PM

bump - no takers? Anyone heard of an M46 x .75 thread on any equipment?

Post Extras: Print Post   Remind Me!   Notify Moderator  
sternsplitter
journeyman


Reged: 08/31/08

Re: help please - metric / optics equipment threads new [Re: john gabriel]
      #6326444 - 01/21/14 03:36 PM

M46 is a standard thread. One barrel of my Meade #930 diagonal mirror screws with M46 into the body. That barrel is rather long (intended for using a Barlow lens). For attaching a camera and to get into focus I removed it and used an adapter Baader #2958046 instead which has a M46 thread (Google).

Regards, Martin


Post Extras: Print Post   Remind Me!   Notify Moderator  
Mark9473
Postmaster
*****

Reged: 07/21/05

Loc: 51N 4E
Re: help please - metric / optics equipment threads new [Re: john gabriel]
      #6326459 - 01/21/14 03:52 PM

Quote:

Meaning that both T and T2 are M42? I found the wiki article confusing.




T thread is M42x1.0 whereas T2 is M42x0.75 so the threading is different.


Post Extras: Print Post   Remind Me!   Notify Moderator  
MikeML
professor emeritus
*****

Reged: 10/09/04

Loc: NJ
Re: help please - metric / optics equipment threads new [Re: Mark9473]
      #6326564 - 01/21/14 05:04 PM

Quote:


T thread is M42x1.0 whereas T2 is M42x0.75 so the threading is different.




M42 x1 is a Pentax or Universal thread. T and T2 are both M42 x0.75


Post Extras: Print Post   Remind Me!   Notify Moderator  
john gabriel
sage
*****

Reged: 12/13/11

Loc: Southern California
Re: help please - metric / optics equipment threads new [Re: sternsplitter]
      #6326571 - 01/21/14 05:08 PM

Quote:

M46 is a standard thread. One barrel of my Meade #930 diagonal mirror screws with M46 into the body. That barrel is rather long (intended for using a Barlow lens). For attaching a camera and to get into focus I removed it and used an adapter Baader #2958046 instead which has a M46 thread (Google).



Hi Martin,
Thank you for replying! I'm sorry I'm not sure from your description which part(s) would have the female M46 thread - sounds like probably the diagonal body part, which means the Baader #2958046 has both male and female ends(?).

I'm looking for any reasonably priced accessory that has female M46 x 0.75 thread. In 3 days of googling and supplier inquiry I've not found that. Thank you!
John


Post Extras: Print Post   Remind Me!   Notify Moderator  
john gabriel
sage
*****

Reged: 12/13/11

Loc: Southern California
Re: help please - metric / optics equipment threads new [Re: john gabriel]
      #6326592 - 01/21/14 05:21 PM

Hi Martin,
Baader #2958046 only has the male M46 thread. Won't work. Now if I could only buy your diagonal body from you....

John


Post Extras: Print Post   Remind Me!   Notify Moderator  
MikeML
professor emeritus
*****

Reged: 10/09/04

Loc: NJ
Re: help please - metric / optics equipment threads new [Re: john gabriel]
      #6326667 - 01/21/14 06:01 PM

Looks like an Ebay special. It may thread directly into a 50mm finder tube. One caveat, not all 50mm tubes are the same diameter. You might try some of the photo stores for step up and step down adapters. As a last resort find a machine shop that can make an adapter $$$ unless you have a friend that can make it.
Good Luck, BTW, I'm curious as to how you make out with this.


Post Extras: Print Post   Remind Me!   Notify Moderator  
john gabriel
sage
*****

Reged: 12/13/11

Loc: Southern California
Re: help please - metric / optics equipment threads new [Re: MikeML]
      #6326815 - 01/21/14 07:16 PM

Thank you Mike - you been very helpful. It will be awhile before I get back to you, but I will let you know. I have told myself for several years now that I need to be done with anything eBay. The seller stated that it's of a type commonly used on "guide scopes". Perhaps I can find a trashed 50 mm finder with good back plate on it.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Kunama
professor emeritus


Reged: 10/22/12

Re: help please - metric / optics equipment threads new [Re: MikeML]
      #6326848 - 01/21/14 07:30 PM

John It would help if we knew what it is you want to attach this focuser to, ie thread on your scope.
There are several stepdown rings that have M46 p 0.75 threads but they usually fit common camera filters M52, M55, M62 etc.

I went through a similar situation recently trying to fit an SCT 2" 24tpi threaded item to a Tak FS60 (M55.9 x0.75 thread) in the end I got a Takahashi extension tube and had a 2" SCT thread cut to the other end of it.


Post Extras: Print Post   Remind Me!   Notify Moderator  
john gabriel
sage
*****

Reged: 12/13/11

Loc: Southern California
Re: help please - metric / optics equipment threads new [Re: Kunama]
      #6326990 - 01/21/14 08:26 PM

Quote:

John It would help if we knew what it is you want to attach this focuser to, ie thread on your scope.
There are several stepdown rings that have M46 p 0.75 threads but they usually fit common camera filters M52, M55, M62 etc.

I went through a similar situation recently trying to fit an SCT 2" 24tpi threaded item to a Tak FS60 (M55.9 x0.75 thread) in the end I got a Takahashi extension tube and had a 2" SCT thread cut to the other end of it.



Hi Kunama,
A reasonable question you ask. But I've been asking the question in reverse: "What, if anything, will this focuser thread into? Please tell me."

When you say, "There are several stepdown rings that have M46 p 0.75 threads..", I'm betting you probably mean male M46 x 0.75, not female. Please tell me I'm wrong! I want any female M46 part, so that I can modify it to mount on a base plate of my own construction. I just want the female M46. My telescope has no ready-made threads of either gender to mount the focuser on.

The focuser will then thread into my DYI base plate (made from wood or metal plus any female M46 that I can get my hands on!) on the side of my 7" newt OTA.

I only bought the focuser because the seller made the application sound common. Now I see that this is not turing out to be the case.


Post Extras: Print Post   Remind Me!   Notify Moderator  
Kunama
professor emeritus


Reged: 10/22/12

Re: help please - metric / optics equipment threads new [Re: john gabriel]
      #6327052 - 01/21/14 09:08 PM

John, You're WRONG ....... and I know that is what you want to hear >>>>
an M46 STEP-UP ring is male 46 however lets say you get a SD72-46 Stepdown Ring you get a female M46 thread and a male M72.

With the SD72-46 just file the external M72 thread down to smooth then
flush mount it to your scope's backplate with some stainless steel cap screws ......... and Hey Presto !!!

See the link for a chart of all the SD rings:

http://www.ebay.com.au/itm/72-46-Step-Down-Adapter-Ring-72mm-to-46mm-Thread-N...

http://midopt.com/assets_downloads/MidOpt_StepDownRings.pdf

Edited by Kunama (01/21/14 09:41 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
john gabriel
sage
*****

Reged: 12/13/11

Loc: Southern California
Re: help please - metric / optics equipment threads new [Re: Kunama]
      #6328275 - 01/22/14 12:31 PM

Oh, HURRAH! I'M WRONG! I'M WRONG!

Thank you so very much, Kunama! I'll be following those links and getting on the track of that SD72-46 soon. (Hmmm... just checked those and it looks like I am in design mode again. What I want to do is definitely "do-able" from here... )

I should thank not only you, but all the others who have patiently waded through my clumsy explanations about what it is that I am trying to do. Communication is an art! (and I can never stop learning)
Cheers!
John

Edited by john gabriel (01/22/14 12:42 PM)


Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
12 registered and 31 anonymous users are browsing this forum.

Moderator:  zjc26138, tecmage, rflinn68 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 377

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics