Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

Equipment Discussions >> Equipment

Pages: 1
jwheel
professor emeritus


Reged: 01/23/08

Loc: Fort Davis TX
modifying an older drive corrector for autoguiding
      #6326652 - 01/21/14 05:55 PM Attachment (6 downloads)

I have an old Lumicon drive corrector and I was wondering if it would be possible to modify it for autoguiding with my mount which does not have an st4 port. I have seen some items from shoestring astronomy that might work:

http://www.shoestringastronomy.com/

Attached are some pictures of my drive corrector. Sorry for the poor quality of some of them.

Joe Wheelock


Post Extras: Print Post   Remind Me!   Notify Moderator  
Ricky
Carpal Tunnel
*****

Reged: 09/09/03

Loc: Nor Cal
Re: modifying an older drive corrector for autoguiding new [Re: jwheel]
      #6327380 - 01/21/14 11:45 PM

Hi Joe,
I would repost this in the diy forum. I'm sure you'll get some good advice.


Post Extras: Print Post   Remind Me!   Notify Moderator  
jwheel
professor emeritus


Reged: 01/23/08

Loc: Fort Davis TX
Re: modifying an older drive corrector for autoguiding new [Re: Ricky]
      #6328032 - 01/22/14 10:43 AM

Thanks Ricky.

Post Extras: Print Post   Remind Me!   Notify Moderator  
Pages: 1


Extra information
11 registered and 31 anonymous users are browsing this forum.

Moderator:  zjc26138, tecmage, rflinn68 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled


Thread views: 104

Jump to

CN Forums Home


Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics