Click here if you are having trouble logging into the forums
Privacy Policy |
Please read our Terms
of Service | Signup and
Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User
Hrundi
Pooh-Bah
Reged: 02/06/08
Posts: 1247
Loc: Estonia
|
|
I was trying to stack some planet images (made on a ccd), in registax, and basically I have achieved nothing.
Firstly, registax apparently cannot debayer M25C images (registax 5 could debayer half of them, and then completely fail on another half of the frames).
So I get the color out in maxim dl. Now registax doesn't detect color. Says they're black and white, while stretching in maxim produces brownish colors with ease.
Once I stack them in registax, I get one of three things:
a) nothing, aka a black square
b) black and white ball, meaning the color was lost
c) a green ball, meaning that it can, apparently, only see green.
Anyone have an idea what's going on? I got ~800 ccd frames here waiting to be stacked, and registax is being a complete pain.
--------------------
|
Lunatiki
Carpal Tunnel
Reged: 08/07/05
Posts: 1865
Loc: Amarillo, TX
|
|
Are you using a 32bit FIT file or 16bit? Use Maxim dl to save the 32bit as a 16bit, if you haven't already tried that.
--------------------
Mars Watch
All images taken with:
Celestron CPC 1100
DBK 21AF04.AS
K3ccd/Registax4/PSP8/Maxim DL IP
ALPO Member #4287
|
Hrundi
Pooh-Bah
Reged: 02/06/08
Posts: 1247
Loc: Estonia
|
|
I tried with both 16 and 8 bit fit formats, got nothing.
If I load a single frame the 32 bit format, I get the blank square. IEEE float - loads only the green channel. 16 bit - only the green channel. 8 bit - only the green again.
--------------------
|
|
4 registered and 4 anonymous users are browsing this forum.
Moderator: Charlie Hein, knuklhdastnmr
Print Thread
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Thread views: 61
|
|
|
|
|
|
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
[Re: 