Click here if you are having trouble logging into the forums
Privacy Policy |
Please read our Terms
of Service | Signup and
Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User
ebeyonder
member
Reged: 10/16/09
Posts: 45
Loc: Cambridge, MA, USA; Singapore
|
|
Hi all,
I am planning on getting into monochrome CCD imaging for both planets and DSOs.
I plan on getting a DMK-21AU04-AS and maybe some StarShoot Pro Monochrome CCD eventually. (I currently have an Orion StarShoot Pro v2 and a Neximager.)
I would like to ask whether I need to get 1.25" AND 2" filters, or would 2" filters be enough for both these cameras? In other words, can I have 2" filters in a 2" filter wheel and then use a 2"-1.25" eyepiece adapter for the smaller CCD chip, rather than have two separate sets of filters and filter wheels?
Any comments would be appreciated. Thank you!
--------------------
Meade ETX-90, ETX-LS, LX-90 8"
|
Zoeff
sage
Reged: 06/10/09
Posts: 260
Loc: Haarlem, Netherlands
|
|
A 2" filter will give you identical results compared to a 1.25" filter when used with a smaller chip, assuming both filters are of the same type and company.
So yeah, I'd save some money and go for the 2" filters right away. Keep the 2" to 1.25" adapter as short as possible though, you might not be able to reach focus otherwise (depending on your scope).
--------------------
Telescopes: NexStar 8SE, 90ED f/5.5 doublet, Galileoscope
Accessories: Hyperion 36mm, GSO 32mm, E-lux 25mm, Hyperion 8mm,
DBK 41AU02.AS, 2x Barlow, 0.63x Focal Reducer, Solar Filter, UHC Filter
My (astro-)photos can be found on flickr.
|
|
4 registered and 5 anonymous users are browsing this forum.
Moderator: Charlie Hein, knuklhdastnmr
Print Thread
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Thread views: 59
|
|
|
|
|
|
|
Previous
Index
Next
Threaded
Edit
Reply
Quote
[Re: 