Click here if you are having trouble logging into the forums
Privacy Policy |
Please read our Terms
of Service | Signup and
Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User
BillP
Carpal Tunnel
   
Reged: 11/26/06
Posts: 2212
Loc: Vienna, VA
|
Re: Trying to "modify" baader hyperions, help!
08/07/08 05:01 PM
|
|
|
No. It's better corrected off-axis without those elements. Quite unexpected. So if all you do is remove the Smyth group in the chrome barrel the edge is quite horrible with the 5mm. Much better when you remove the others as well so you are only left with a 4-element design. Throughput is noticably better as well given 2 doublets just got removed -- not that it was bad to begin with. Again, it's no Nagler (although I lovingly call it my 26H5), but much better correction than simply removing the Smyths IMO.
FYI, I've done this also with the 17mm, and I recall it is not bad either. However, unlike the 5mm, for some reason the elements in the upper housing iof the 17mm are not held in by a retaining ring but instead using the barrel housing to do this. So once you break the light glue seal they use to unscrew the 2" housing (at the joint where the rubber grip is), the elements will fall to the floor if you are not careful with the 17mm. I guess you can figure how I know that huh
-------------------- 250mm f/4.7 Orion XT10i Dobsonian
102mm f/8.0 Tak TSA Super-APO
66mm f/5.9 WO ZenithStar SD APO
40mm f/10 Coronado P.S.T.
|
|
Trying to "modify" baader hyperions, help!
|
Brooklyn
|
08/06/08 01:23 AM
|
Re: Trying to "modify" baader hyperions, help!
|
BillP
|
08/06/08 06:29 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Brooklyn
|
08/06/08 06:42 PM
|
Re: Trying to "modify" baader hyperions, help!
|
BillP
|
08/06/08 10:06 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Brooklyn
|
08/06/08 11:10 PM
|
Re: Trying to "modify" baader hyperions, help!
|
BillP
|
08/06/08 11:32 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Phillip Creed
|
08/07/08 09:10 AM
|
Re: Trying to "modify" baader hyperions, help!
|
Gaz O'C
|
08/08/08 12:33 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Brooklyn
|
08/08/08 07:05 PM
|
Re: Trying to "modify" baader hyperions, help!
|
BillP
|
08/07/08 05:01 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Brooklyn
|
08/07/08 06:39 PM
|
Re: Trying to "modify" baader hyperions, help!
|
BillP
|
08/07/08 09:37 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Brooklyn
|
08/08/08 01:28 AM
|
Re: Trying to "modify" baader hyperions, help!
|
Lawrence Sayre
|
08/06/08 06:47 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Brooklyn
|
08/06/08 07:08 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Lawrence Sayre
|
08/06/08 07:26 PM
|
Re: Trying to "modify" baader hyperions, help!
|
NGC6144
|
08/06/08 06:59 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Lawrence Sayre
|
08/06/08 07:21 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Brooklyn
|
08/06/08 01:39 AM
|
Re: Trying to "modify" baader hyperions, help!
|
Wobrak
|
08/06/08 06:47 AM
|
Re: Trying to "modify" baader hyperions, help!
|
DSalters
|
08/06/08 01:41 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Brooklyn
|
08/06/08 01:53 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Lawrence Sayre
|
08/06/08 04:43 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Brooklyn
|
08/06/08 05:42 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Lawrence Sayre
|
08/06/08 05:48 PM
|
Re: Trying to "modify" baader hyperions, help!
|
Lawrence Sayre
|
08/06/08 01:40 PM
|
|
5 registered and 10 anonymous users are browsing this forum.
Moderator: Greg K., Jason B, csa/montana
|
Forum Permissions
You cannot start new topics
You cannot reply to topics
HTML is disabled
UBBCode is enabled
|
Rating:
Thread views: 499
|
|
|
|
|
|
|