Return to the Cloudy Nights Telescope Reviews home page
   · Get a Cloudy Nights T-Shirt · Submit a Review / Article   

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu.... uh, User

Equipment Discussions >> ATM, Optics and DIY Forum

PrestonE
Pooh-Bah
*****

Reged: 04/29/05
Posts: 1170
Loc: Houston,Texas
Re: RTV, Glass, and Holder Material
      07/06/09 08:55 PM

Hi Steve,

Without actually running the FEA but having looked at very similar criteria for the 20inch RC, I would recommend doing just about what we ended up doing...

Thus using the CF plate on the tube definately!!! Otherwise you are only adhering to the edge of the tube.

Then pick the raduis of the elipse at about the 70% region and use a blob at the thickness of about 0.70 inch diameter...every 120 degrees...three abound the parameter should to the trick...

Start the pattern at the 6 oclock position and have the upper 2 at 120 degrees from that...

Try to stay at under 0.0625 inch thickness and practice on something back plate and plate glass to develope a method of getting the diameter of the silicon about the correct diameter...

If you have further questions, just ask...

Best Regards,

Preston

--------------------
A few I enjoy,
and a few more in the works ;<)

Post Extras Print Post   Remind Me!     Notify Moderator

Entire thread
Subject Posted by Posted on
* RTV, Glass, and Holder Material Steven Aggas 07/02/09 04:20 PM
. * Re: RTV, Glass, and Holder Material mark cowan   07/02/09 08:33 PM
. * Re: RTV, Glass, and Holder Material Biff   07/09/09 03:03 PM
. * Re: RTV, Glass, and Holder Material Mark Harry   07/03/09 07:18 AM
. * Re: RTV, Glass, and Holder Material PrestonE   07/03/09 03:36 PM
. * Re: RTV, Glass, and Holder Material mark cowan   07/04/09 02:42 AM
. * Re: RTV, Glass, and Holder Material PrestonE   07/04/09 04:12 PM
. * Re: RTV, Glass, and Holder Material Steven Aggas   07/06/09 03:18 PM
. * Re: RTV, Glass, and Holder Material PrestonE   07/06/09 08:55 PM
. * Re: RTV, Glass, and Holder Material Steven Aggas   07/07/09 12:25 PM
. * Re: RTV, Glass, and Holder Material PrestonE   07/07/09 04:11 PM
. * Re: RTV, Glass, and Holder Material Steven Aggas   07/07/09 05:34 PM
. * Re: RTV, Glass, and Holder Material mark cowan   07/07/09 09:10 PM
. * Re: RTV, Glass, and Holder Material Steven Aggas   07/08/09 12:39 PM
. * Re: RTV, Glass, and Holder Material PrestonE   07/10/09 02:43 PM
. * Re: RTV, Glass, and Holder Material Steven Aggas   07/10/09 03:33 PM
. * Re: RTV, Glass, and Holder Material PrestonE   07/11/09 11:12 PM
. * Re: RTV, Glass, and Holder Material Steven Aggas   07/13/09 12:14 PM
. * Re: RTV, Glass, and Holder Material PrestonE   07/15/09 05:50 PM
. * Re: RTV, Glass, and Holder Material Steven Aggas   07/16/09 11:28 AM
. * Re: RTV, Glass, and Holder Material PrestonE   07/17/09 10:37 AM
. * Re: RTV, Glass, and Holder Material Steven Aggas   07/13/09 12:16 PM
. * Re: RTV, Glass, and Holder Material Steven Aggas   07/13/09 05:06 PM
. * Re: RTV, Glass, and Holder Material mark cowan   07/08/09 03:42 PM
. * Re: RTV, Glass, and Holder Material Steven Aggas   07/09/09 12:28 PM
. * Re: RTV, Glass, and Holder Material Charl   07/06/09 06:43 PM
. * Re: RTV, Glass, and Holder Material PrestonE   07/02/09 06:13 PM

Extra information
9 registered and 10 anonymous users are browsing this forum.

Moderator:  Don W, Mike I. Jones 



Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating:
Thread views: 620


Jump to

CN Forums Home



Cloudy Nights Sponsor: Astronomics