Return to the Cloudy Nights Telescope Reviews home pageAstronomics discounts for Cloudy Nights members
· Get a Cloudy Nights T-Shirt · Submit a Review / Article

Click here if you are having trouble logging into the forums

Privacy Policy | Please read our Terms of Service | Signup and Troubleshooting FAQ | Problems? PM a Red or a Green Gu… uh, User

The long-awaited conversion to CN 3.0 is in progress. Please see this thread for important information.

See update on outage timing here.

Equipment Discussions >> Mounts


Reged: 10/27/10

Loc: Northeast Ohio
iEQ45 PE
      12/07/12 06:25 PM

I have a new iEQ45 and would like to measure its PE. I have downloaded and installed ASCOM drivers, PHD and PECprep. I have a Samsung SDC-435 with an EasyCap and a Canon t3i with live view. I have not been able to get PHD to recognize either camera. With the SDC-435, PHD includes the USB capture under WMD capture but refuses to connect (WXastro capture has no problem). Any suggestion on measuring the PEC short of buying a guide camera?

Post Extras Print Post   Remind Me!     Notify Moderator

Entire thread
Subject Posted by Posted on
* iEQ45 PE rkayakr 12/07/12 06:25 PM
. * Re: iEQ45 PE orlyandico   12/07/12 11:00 PM
. * Re: iEQ45 PE rkayakr   12/08/12 08:52 AM
. * Re: iEQ45 PE rkayakr   12/10/12 08:49 AM

Extra information
8 registered and 30 anonymous users are browsing this forum.

Moderator:  Dave M, richard7, bilgebay 

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Thread views: 794

Jump to

CN Forums Home

Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics