- My experience using two 80-millimeter long-focus refractors
- GSO 8-inch TRUE CASSEGRAIN
- Celestron Regal 65ED M2
- Review: The Vixen FL55ss
- PrimaLuceLab Eagle Review
- interstellarum Deep Sky Guide Desk Edition
- Chronicling the Golden Age of Astronomy: A History of Visual Observing from...
- Omegon Mini Track LX2 Review
- Review of the APM 152 ED serial number 245
- THE BURGESS 24MM MODIFIED ERFLE & 10MM ULTRAMONO
- APM 140mm DOUBLET APO REFRACTOR
- Comparison of the Boltwood II and Sky Alert Cloud Sensors
- Chile Dilly!
- MONO & BINO VIEWING WITH THE BAADER MORPHEUS 17.5MM EYEPIECE
- The Eye of the Flak (Das Auge der Flak)
CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.
My Other Telescope is an 8.4 Meter
Discuss this article in our forums
My Other Telescope is an 8.4 Meter
By Patrick Stevenson
Former Assistant Supervisor of Large Optics Fabrication
Steward Observatory Mirror Laboratory
I have been interested in astronomy virtually my whole life, starting with grinding and polishing a six inch Edmund mirror back in the early '60's. Given the times, and my family traditions, I opted for a military career that lasted a total of thirty years. During those years my association with the hobby was limited to reading and looking at pictures.
Upon my retirement from the Army I did the typical Law Enforcement track. It only took a year with the Sheriff's Department to realize that I just didn't want to carry a gun anymore. While looking around for a challenging alternative I ran across an ad for a “Mechanition” (Read Gofor) at the Steward Observatory Mirror Lab. I was intrigued and applied for the position. I was promptly told that I was over-qualified. They felt that with my intensive experience as a retired Army Green Beret, with a Law Enforcement stint, and a BS from Northern Arizona University, that I would become quickly bored and move on.
Since I had virtually no experience in optics of ANY size, I argued that I could not possibly be over-qualified. My love for the science and desire to work in such a prestigious institution in ANY capacity would more than make up for what I lacked in direct experience. Still, I was told that I was over-qualified. I was finally ready to give up but asked one thing before I went away. I would stop bugging, but I wanted the answer in person. In what was, I am sure, an act of desperation, I was given an interview.
I met with the Mirror Lab Manager on a typical summer morning and began my tour and interview. It was clear that the answer was not going to change, but decorum dictated that I be treated as a serious candidate. I learned that the position was generally filled by an Op/Sci undergrad; far from my age of fifty five, and worldly experiences. In any case, the Manager lead me through the lab where I encountered the second 8.4 meter mirror destined for the LBT in Arizona. As we passed the mirror located on the giant test tower, I touched the edge of the monster mirror and smiled. This apparently piqued the Manager's curiosity and he asked what I was thinking. I responded that this was not a telescope, it was a time machine. One that would reach billions of years into our past, perhaps to the origin of the universe. That comment got me the job!
I was so excited to be a part of something so immense in physical size, but also in technological advancement beyond imagination. My spare moments between sweeping floors and getting tools for the “real” workers were spent in reading science papers on the projects, quizzing Phd's with stupid questions, and filling notebooks with critical information. I was, literally, in “Hog” heaven.
By the end of the first year I had become the goto guy to assist the project scientists and engineers. On one particular occasion I was way up in the test tower along with the Chief Scientist of the Lab conducting tests on the mirror some ninety feet below. As we had nothing in common, the conversation was limited to “Hand me that”, or “Step back out of the way”. Desiring to elevate my “serf to master” relationship I mused that it was interesting that this mirror would become significant by utilizing Heisenberg's Uncertainty principle. I received a tolerating stare and a question from the scientist, “What do you mean by that?”. I said that since we were using laser interferometry to test the mirror; the wave theory of light, and imaging would be done using CCD cameras detecting photons of light; the particle theory of light, I found it interesting. He looked at me for a moment and then said, “Who are you?”. I replied that I was a gofor in the lab. Nothing more was said that day.
I continued asking questions and being somewhat underfoot, but harmless. The scientists and engineers began to notice me and actually engaged in multi-word sentences. To make a long story short, I was promoted to Senior Staff Technician with an attendant 500% raise and became the Assistant Supervisor of the Large Optics Fabrication Lab. Why? Because I showed an insatiable thirst for knowledge and became an asset to the program. This all happened in my fifty fifth and sixth years. I had actually become one of the team, frequently invited to meetings chaired and attended by Scientists and Engineers!
The cycle time required to produce a finished 8.4 meter mirror was about two years, if nothing went wrong, which of course, it always did. The entire process starting with casting, progressing through grinding and polishing, and terminating with integrating the mirror to the steel structure known as the “Cell” which would ultimately become the optical assembly ready to be shipped to some far off mountaintop. Because of my lack of experience and my age, I searched for documents that would spell out each of the steps in the process. There were none! As a career military man, I was stunned! The whole process was so new that the developers of each major stage; Casting, Polishing, and Integration were still in charge of their respective steps and simply directed work crews based on their memory. While the system worked well, without proper instructional documentation, the very future of the process was entrusted to the mental and physical health of essentially three men!
I began a two year project of writing and documenting the entire process utilizing a Mil-Spec format that incorporated exact details including digital pictures of each step in the process. I thought my efforts would be appreciated and accepted without reservation. I was wrong. I was presented with the, “If you write it all down ANYBODY could do it!” dismissal. Job security was suddenly threatened! I was viewed as a pariah and had to take my efforts underground. Two years after I started, I completed a nearly two hundred page Mirror Fabrication Specification. It was instantly rejected and relegated to an obscure file on the main server not to be seen again for almost ten years!
I retired from the Mirror Lab in 2009 and moved to a three acre plot forty miles east of Tucson in the Sonora Desert where I built my own 10x12 foot roll-off-roof observatory where I began astrophotography. Years passed before I came in contact with my old boss at a Star Party. Our friendship picked up as though no years had passed. Although formally retired, he had returned to work part-time at the Lab. He told me that my Mil-Spec procedure had been resurrected and was required to be used for each process. My other suggestion that all new Technician hires be required to construct a ten inch Dobsonian telescope following the entire process from casting their own mirror, generating, grinding, polishing, testing, and completing the assembly of their telescope before they could work on large optics had been adopted. I actually made a difference!
Orion EON 130mm Triplet
Celestron CGX mount
ASI120MM Guide camera
Canon T3i modified imaging camera
Orion 60mm guide scope
Five years imaging
130mm Parallax APO
Orion 10” f/3.9 astrograph
Losmandy G11 Gemini 2
- Dave Mitsky, Patrik Iver, Joe Bergeron and 63 others like this