Mount Accessories and Drives
Description
Info
Price
Yesterday, 07:56 PM
Views: 34
$1.00
Wanted CG4 manual drive extensions wanted
By: Couder
Location: Missouri
I'm looking for the flexible extensions that go between the knobs and the mount. Also need info as to which type or b...
Yesterday, 11:12 AM
Views: 30
$50.00
Wanted Stellarcat Servocat wired hand controller Gen 1/2
By: snorkler
Location: California
I'm looking for a Gen 1/2 Servocat wired handpad or hand controller with ~1/8" stereo phono jack connector (not Gen...
Yesterday, 05:54 AM
Views: 49
$1.00
Wanted Looking for ADM V Series Dovetail Saddle
By: julianchan
Location: Oregon
Looking for ADM V Series Dovetail Saddle VSAD-M8-V Series Saddle. 8mm Counterbored Version. Drop me an email if you...
03 Dec 2020
Views: 30
$1.00
Wanted Losmandy 8 inch Meade SCT dovetail and radius blocks
By: scottsdalejohn
Location: Arizona 85259
If you have one that is excess of your needs, I would like to have it. Please let me know your cost including shippin...
03 Dec 2020
Views: 25
$1.00
Wanted WTB Orion XTg Base or Electronics
By: sparks
Location: Fairfax Station, VA
Looking to buy any of the following for an Orion XTg: alt and/or az boards w or w/o plastic covers, complete electron...
03 Dec 2020
Views: 36
$1.00
Wanted 1.5" bore counterweight
By: Rob.K
Location: Edmonton, AB
Looking for a Counterweight, around 20lbs, with a 1.5" bore. Thanks!!
03 Dec 2020
Views: 42
$1.00
Wanted 185mm ID Tube Rings w/dovetail hole
By: pweiler
Location: Chicago, IL
185mm ID Tube Rings w/dovetail screw hole. (182mm is too small)
02 Dec 2020
Views: 39
$1.00
Wanted Celestron 5SE Bezel
By: vrjunkie
Location: 45429
Looking for a Celestron 5SE Bezel - if you have one - I'll take it!
02 Dec 2020
Views: 39
$1.00
Wanted Wanted: top rail for GSO RC6 scope
By: celegroz
Location: Oklahoma
Need a top rail for my GSO RC6 scope. I think I need something like this:https://www.admacces...6-rc-telescope/Anyone...
01 Dec 2020
Views: 29
$1.00
Wanted Orion Narrow to Wide Dovetail Adapter
By: astrocecco
Location: Anywhere
Hello everyone,I'm looking for an Orion Narrow to Wide Dovetail Adapter, please contact me with info and photo if you...
29 Nov 2020
Views: 56
$1.00
Wanted Non-goto G8/11
By: greg.hennessy
Location: Fairfax Virginia
I am looking to buy a non goto G8 or G11 drive.
29 Nov 2020
Views: 36
$1.00
Wanted Astro-Physics ADATRI and CWs
By: blackdragon72
Location: CA
Looking for AP ADATRI and 1.875" CWs (18lbs) in great condition
29 Nov 2020
Views: 32
$1.00
Wanted WANTED: 60mm tube rings
By: BlueTrane2028
Location: 19004
Title says it all. I'm interested in a set of tube rings to fit a 60mm refractor. LMK what you have and how much yo...
28 Nov 2020
Views: 32
$1.00
Wanted Meade Audiostar Hand Controller Wanted
By: rac15074
Location: 11762
I'm looking for a Meade Audiostar or Autostar controller in good working condition that will work with a Meade ETX 90...
26 Nov 2020
Views: 26
$1.00
Wanted Tube Rings for Orion 120 ST f5 (~116mm)
By: gustavo_sanchez
Location: PR
Hello, I'm looking to mount an Orion 120mm OTA, which is sold without tube rings. If you have a pair of rings that co...
25 Nov 2020
Views: 59
$1.00
Wanted Meade Autostar Hand Controller
By: Binary Star
Location: OH - Ohio
I'm looking for a Meade 497 Autostar controller in good working condition to complete a mount that I'm donating. The...
19 Nov 2020
Views: 44
n/a
Wanted Celestron starsync
By: Maritime
Location: Seattle
Want to buy starsync in good condition.
19 Nov 2020
Views: 45
$1.00
Wanted Encoders Wanted
By: RagtopRomeo
Location: Hemet CA
Hello, I am looking for a set of Encoders for a Celestron Advanced Astro Master. The Encoders are 2160 and 4000. Plea...
16 Nov 2020
Views: 56
n/a
Wanted Celestron Skysync
By: lilmoose
Location: Any
Looking for used but working Celestron Skysync to use with Evolution 8 telescope.
15 Nov 2020
Views: 49
n/a
Wanted Y2K Chip For Celestron Ultima 2000 Wanted
By: Tom Duncan
Location: Chico, CA 95926
I have a nice Celestron Ultima 2000 that is not Y2K compliant, the chip is labeled 15.04, I need 15.5 or newer so I'd...
14 Nov 2020
Views: 36
$1.00
Wanted WANTED: ADM DUP11 Dovetail
By: norcaltakguy
Location: usa
I am looking for a D Series ADM DUP11 dovetail plate, if you want to part with yours please get in touch ( including...
12 Nov 2020
Views: 40
$1.00
Wanted Wanted Optec Libra Alt-Az Adjustable Mount
By: buckeyestargazer
Location: IN
I'm looking for an Optec Libra Alt-Az Adjustable Mount (Optec #19230). This device helps aim one telescope with anoth...
12 Nov 2020
Views: 58
$1.00
Wanted Meade Audiostar or Autostar Hand Controller
By: rac15074
Location: 11762
I'm looking for a Meade Audiostar or Autostar controller in good working condition that will work with a Meade ETX 90...
12 Nov 2020
Updated: 14 Nov 2020
Views: 57
UPDATED
n/a
n/a
Wanted MT-1 Drive Motors and Control
By: Philstin
Location: Colorado
I need the drive motors and the SD controller for my Vixen Super Polaris mount. I am having difficulty finding the ap...
11 Nov 2020
Updated: 14 Nov 2020
Views: 48
UPDATED
$50.00
$50.00
Wanted I.S.O Celestron Starsense Hand controller
By: Phambric21
Location: Oklahoma
Hi, Im looking for a replacement starsense hand controller. Preferably one with the updated usb port. Thank you, Pe...
CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.
Recent Topics
-
-
-
-
-
-
-
-
-
Moon interference with DSO viewingPlanetNamek - Today, 12:19 AM
Beginners Forum (No astrophotography)
-
Single and double stacked disks from 11-29-2020hopskipson - Today, 12:08 AM
Solar Observing and Imaging
Powered by Classifieds
