ATM Parts and Such
20 Aug 2020
I would like to buy a spider that will fit a 6 7/8" id tube with a 1.25 secondary holder. Old Novak, RV-6 spider or...
28 Mar 2020
Got an old tired mirror, under loved, a bit rough? Any condition will do, so the cheaper rougher candidate is preferr...
27 Feb 2019
I am looking for this paint: Berger Antireflexfarbe flat black OTA paint Please let me know what you have and we can...
02 Jul 2018
Wanted WANTED : plano convex lens
Hello, I'm looking for a long focal length singlet with a diameter greater than 80mm
31 May 2017
Wanted Howie Glatter Sling
Hi - I am looking for a howie glatter sling to install on my 15 inch UC . If you have the one for the 18 inch UC, tha...
16 Aug 2019
Wanted 4.5" f/4 Mirror
Our library loans out telescopes, and a patron broke the primary on one of them. So, were looking for a replacement 4...
15 Jun 2018
Wanted 8se corrector plate
Looking for 8se corrector plate or even used or danage 8se with good condition of the corrector plate
08 May 2018
Wanted Carton 100mm f/13 lens
Hi, I want to buy a Carton 100mm f/13 objective lens with or without cell. Preferably in Europe. Thanks, Dorin
10 Sep 2018
Wanted Mirror set
Hello. I am looking for a 16 inch f/4.5 mirror and matching secondary. One in Canada would be nice. In Ontario, ev...
28 Oct 2020
Wanted intelliscope encoder
I am looking for one of these - an orion intelliscope encoder, I got a used intelliscope system and this encoder does...
10 Jun 2018
I'm on the lookout for 12" or 12.5" primary mirrors. Must have good coating, NO scratches or chips. Please let me kn...
18 Feb 2018
Wanted 7 inch secondary
I am looking for a 7 inch secondary mirror
15 Oct 2020
Updated: 15 Oct 2020
I'm looking for an ETX 80 operable base/drive so I might mount a workable Meade ETX OTA as a give-away prize for our...
24 Jan 2021
Anyone have any unused EMS or mirror/prism systems, in decent shape, for a binoscope setup that they're not using and...
Yesterday, 05:39 AM
I'm looking for a good quality 2.6" secondary for my 12.5" Scope project. Thanks!
21 May 2020
Fellow ATM'ers! Looking for some gently used Obsession Altitude bearings from a 15" scope, these are the 20.5" arcs....
08 Nov 2018
Wanted Tube for 6" Newtonian
I'm looking for a tube to rebuild a 6" Newtonian scope. A fiber glass tube by Parks, Cave etc would be ideal. A tub...
27 Oct 2020
Without realizing it until last night I am missing a foot for my Atlas EQ mount and tripod. Looking to replace it. If...
09 Dec 2017
Have an old C8 JMI MOTODEC I want to put on one of my vintage c8’s - looking for the install kit - collar, coupler, s...
01 Oct 2019
Updated: 02 Oct 2019
Wanted foucault tester
Hi, Someone's got ot have a tester that they don't use or need. Let me know if you have one. Maybe we can work out a...
24 Nov 2019
Wanted Mirror Blank Wanted
Hello, I am looking for an 18" dia. x at least 1" thick (preferably) plate glass (or similar) blank suitable for maki...
13 Nov 2019
Hi, our club here in Souther Utah has acquired a coulter 13.1 DOB. We would like to upgrade the mirror cell. anyone...
25 Nov 2020
I would like to purchase a Novak 6" Cassegrain mirror mount with focuser that will fit a 7" tube. Please let me know...
26 May 2018
Wanted Meade 8" primary cell
I'm looking for an aluminum primary cell which will fit inside a 9"ID sonotube. It can be a Meade cell or an adjustab...