Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

What are the Focus Boss II to Starizona Microtouch cable pinouts?

This topic has been archived. This means that you cannot reply to this topic.
No replies to this topic

#1 Whichwayisnorth

Whichwayisnorth

    Gemini

  • *****
  • topic starter
  • Posts: 3,366
  • Joined: 04 Jul 2011

Posted 28 November 2016 - 06:47 PM

I have a Focuslynx aka Focus Boss II controller and a newly purchased Starizona Microtouch low profile motor but buying the motor alone I did not get a cable.

 

I can make my own if I only knew the pinouts for both sides.  Anyone happen to have such a cable and could look at it for me?  Or photograph both ends so I can match up the colors would work too.

 

Thank you.

 

Edit: Someone found it for me and sent me a link. Just in case someone needs it for the future, here is the link:

http://www.optecinc.... Cable_rev2.pdf


Edited by Whichwayisnorth, 28 November 2016 - 10:40 PM.



CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics