Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Getting Started with SGP

  • Please log in to reply
2 replies to this topic

#1 Umasscrew39

Umasscrew39

    Viking 1

  • *****
  • topic starter
  • Posts: 747
  • Joined: 07 Dec 2016
  • Loc: Central Florida

Posted 20 February 2019 - 07:43 AM

I'm sure I am going to have a lot more questions but I have one for now on stacking.  I see how you take individual frames and each .fit file is saved.   How are these stacked to get your final image?  It is probably obvious but I am missing it.



#2 einarin

einarin

    Surveyor 1

  • *****
  • Posts: 1779
  • Joined: 23 Dec 2016

Posted 20 February 2019 - 09:17 AM

SGP does not do stacking, it's just for taking images/plate solving/sequencing.

So you need different software for stacking, like DSS or PI.


  • Umasscrew39 likes this

#3 Umasscrew39

Umasscrew39

    Viking 1

  • *****
  • topic starter
  • Posts: 747
  • Joined: 07 Dec 2016
  • Loc: Central Florida

Posted 20 February 2019 - 06:05 PM

ahhh.....ok  Then I did not miss it.  Well, I have DSS so can use that.

 

Thanks much




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics