Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Help - identifying possible microsocope parts

  • Please log in to reply
No replies to this topic

#1 bartine

bartine

    Surveyor 1

  • *****
  • topic starter
  • Posts: 1900
  • Joined: 03 Oct 2007
  • Loc: Silver Spring, MD

Posted 01 May 2019 - 09:58 PM

I picked up some Unitron and old Criterion equipment, and it came with a cigar box full of components that look like they are from a focuser.

 

Three separate parts

 

One is a set of focuser looking components that have a built in lens on one end, and a threaded lens component on the other end.  These pieces are also the only marked pieces - they have say - "XAW1"

 

One has a lens component only on oneend, and is open on the other side.  The hole in the top of this piece is threaded, but is slightly smaller than a standard microscope eyepiece size.  

 

The third component is a heavy screw type component, and also has a threaded lens on one end.  It is much smaller - almost like .965.

 

 

Can anyone hele me identify these pieces?

Attached Thumbnails

  • 0501192119.jpg
  • 0501192120a.jpg
  • 0501192120.jpg
  • 0501192119a.jpg
  • 0501192120a-001.jpg



CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics