Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Trying to Mate a set of Takahashi Rings to a Unistar Basic Mount, best way to do this?

  • Please log in to reply
No replies to this topic

#1 danatureboy

danatureboy

    Lift Off

  • *****
  • topic starter
  • Posts: 1
  • Joined: 02 May 2008
  • Loc: Scarborough, ON, Canada

Posted 21 May 2019 - 07:18 PM

Hi,

 

Like the title says. The Unistar basic Mount I own has two slots that are smaller than the screws used for the Takahashi rings? I figured the easier solution was to dovetail the rings and put a saddle onto the mount, but I don't like the additional weight. Is there a manufacturer that designs a utility plate that could be put in between the two?

 

Thank you for you help guys,

 

Minh




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics