Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Aleko AR900

  • Please log in to reply
4 replies to this topic

#1 physics911

physics911

    Ranger 4

  • *****
  • topic starter
  • Posts: 347
  • Joined: 28 Feb 2006
  • Loc: North Georgia, USA

Posted 24 June 2019 - 07:27 AM

Does anyone have the dimensions associated with the Aleko AR 900 sliding gate motor? I've got one on order for me to start automating my roof but I couldn't find the dimensions in their manual online and I would like to start doing some prep work. I most interested in how far off is the standoff on the nylon track. In other words when you screw the nylon track on how far away does it stick. And also how far is the top of the spur gear from the bottom of the unit.

Thank you
Chris
  • Greyhaven likes this

#2 Greyhaven

Greyhaven

    Skylab

  • *****
  • Posts: 4337
  • Joined: 11 May 2004

Posted 24 June 2019 - 08:04 AM

Chris

Just found this info on the Tech. spec. page on THIS site. Hope it helps.

Grey

Model: ALEKO AR900 Sliding Gate Opener
    Power supply: 120V/60HZ or DC24V
    Motor: 24VDC Absorbed power: 120W
    Gate moving speed: (7.9“/second) 20 cm/second
    Max gate weight: 900LB/400KGS Max torque: 8Nm
    Environmental conditions: from -15°C to +40°C
    Protection class: IP44
    Dimensions: 30 × 20 × 23 cm



#3 physics911

physics911

    Ranger 4

  • *****
  • topic starter
  • Posts: 347
  • Joined: 28 Feb 2006
  • Loc: North Georgia, USA

Posted 24 June 2019 - 08:39 AM

thank you. That's actually where I ordered it from. I saw those dimensions but it doesn't tell me how high up on the side the spur gear is or how far away from the wall the nylon track will ride. It's really not that big of a deal I can engineer at once I get everything. I was just trying to save myself the inevitable five trips to home Depot
  • Greyhaven likes this

#4 Greyhaven

Greyhaven

    Skylab

  • *****
  • Posts: 4337
  • Joined: 11 May 2004

Posted 24 June 2019 - 11:08 AM

LOL I'm awaiting the delivery of my rack sections now, so soon I'll be making my multiple pilgrimages to the Home Depot for supplies. The AR1450 is calmly resting in the shop all wired up and ready to do its part. Just waitingfingertap.gif 

Grey



#5 Greyhaven

Greyhaven

    Skylab

  • *****
  • Posts: 4337
  • Joined: 11 May 2004

Posted 24 June 2019 - 01:53 PM

My racks just arrived. They will stand proud 1 9/16 (40mm) from the surface they're mounted on.

 

Grey




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics