Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Triad 1.25"

  • Please log in to reply
2 replies to this topic

#1 Night shift

Night shift

    Viking 1

  • *****
  • topic starter
  • Posts: 624
  • Joined: 19 Oct 2016
  • Loc: Atlanta Ga.

Posted 16 July 2019 - 03:36 PM

 Contemplating buying a 1.25" Triad. I have an AT115 and a WO80. I will be using my ZWO1600MC-C and curios if the 1.25" will cover the 4/3 sensor. My plan is to use the adaptor  (2"-1.25") that came with my camera and screws into the front of the camera. The question is, will this 1.25" filter work with my set up and cover the sensor properly? 



#2 Mert

Mert

    Fly Me to the Moon

  • *****
  • Posts: 6230
  • Joined: 31 Aug 2005
  • Loc: Spain, Pamplona

Posted 17 July 2019 - 04:16 PM

I use the same filter and have "no" isues ( or not too severe that flats

can 't handle ) with this setup.

I use the ASI1600MCC with the typical nosepiece where the filter

can be screwed into with that adapter!


Edited by Mert, 17 July 2019 - 04:17 PM.


#3 jgraham

jgraham

    ISS

  • *****
  • Posts: 20193
  • Joined: 02 Dec 2004
  • Loc: Miami Valley Astronomical Society

Posted 17 July 2019 - 06:36 PM

I use the 1.25" Triad with my 5.5" f/3.6 Comet Catcher with a ZWO ASI294MC Pro which has a type 4/3 chip and it works quite well. There's a bit of vignetting in the corners, but flats clean it up nicely.


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics