Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Cem120 usb 2.0 hub issues, disconnects?

  • Please log in to reply
No replies to this topic

#1 markm75c

markm75c

    Viking 1

  • *****
  • topic starter
  • Posts: 590
  • Joined: 17 Sep 2009
  • Loc: Pittsburgh, PA

Posted 18 September 2019 - 11:42 PM

Now that i've had some time to fine tune the cem120 and get everything wired, i think im running into an issue i think i saw somewhere, where the usb 2.0 hub on the mount has throughput/connectivity issues.

 

Randomly my components plugged in there, lose their connection.  IE: celestron focuser, asi290mm mini

I tried to take the usb 2.0 input into a hub to see if that would help (powered), no help, same deal.

 

My only recourse at this point might be to put a usb 3.0 hub off the usb 3.0 connector on the dec/saddle to avoid wires dangling down.

 

Is this the issue that involves sending the usb 2.0 board back (somehow) and waiting (eons?) for a replacement?

 

Thanks for any info

 




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics