I have installed this version on a 64bit Windows 7 laptop for testing.
I have tried it with a Sitech I + Mesu 200 MK2 (telescope 1), and a SW AZ-EQ6 (telescope 2), both via Ascom.
Both mounts are currently not installed outside so this is only a bench test.
Connecting to the mounts was ok (after a few goes, but probably usb-serial driver problems more than anything) but pressing ctrl+1 (or 2) does not slew, and pressing the slew button in the ctrl+0 only works now and again.
ctrl+1 does work with the simulator every time.
I also get frustrated that pressing on an object with the mouse, does not automatically load as a 'current object' in the 'slew telescope to' - this means having to open up ctrl+0 and clicking 'current object'. I find this very tedious and I think it should be easy to auto populate when selecting an object?
I need to use this to check the coordinates before I copy and paste into SGPro.
There's an idea - any way to auto send coordinates to SGPro from within Stellarium? That would be nice!
Maybe if there is an issue with ctrl+1 with the ascom driver and this is fixed, then the ctrl+0 ('slew telescope to' screen) will never need to be used?
Another idea is the possibilty to connect and disconnect telescopes using an extra button on the lower bar - there are buttons I have never used (equitorial grid, or constellation lines for example) so having an extra button would be great (connect / disconnect telescope 1, 2, etc...) again, to avoid having to keep opening windows all the time.
Stellarium also crashes frequently (this version only, other versions I have are fine). If you need a logfile or screenshot, let me know.