Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

MaximDL crashes when connecting to Scopedome

  • Please log in to reply
1 reply to this topic

#1 Arie

Arie

    Ranger 4

  • -----
  • topic starter
  • Posts: 383
  • Joined: 01 Sep 2015
  • Loc: Netherlands

Posted 16 October 2019 - 12:02 PM

I have a Scopedome that runs by Scopedome software. Ascom driver and a small control program.

Use it now 2 years without issues. SGP, Voyager, ModelCreator etc.

Just installed a trial version of MaximDL.

When, in MaximDL, I connect the dome and my 10Micron mount (but with a simulated mount it is the same), maximdl crashes out at the first dome movement.

Has anybody out there had this same experience? And what was the cure?

Buy another dome? :-)

Or ditch MaximDL?

 

Arie



#2 Bob Denny

Bob Denny

    Vendor (DC-3 Dreams)

  • -----
  • Vendors
  • Posts: 133
  • Joined: 17 Mar 2009
  • Loc: Mesa AZ USA

Posted 17 October 2019 - 10:30 PM

Ask Diffraction for help. They do support their software. Dumping the dome or Maxim would be my last choice. If it is an ASCOM Dome standard violation, they will help you see it. Also I just worked with ScopeDome on an ASCOM non conform and they responded and made it right.

Sent from my Nexus 7 using Tapatalk


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics