Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Anyone use a reducer+flattener w/AT92?

  • Please log in to reply
1 reply to this topic

#1 Phillip Creed

Phillip Creed

    Idiot Seeking Village

  • *****
  • topic starter
  • Posts: 3256
  • Joined: 25 Jul 2006
  • Loc: Canal Fulton, OH

Posted 08 November 2019 - 01:41 PM

The NP-101 has long been my dream scope.  But the AT-92EDT makes for a compelling buy as well, especially considering my recent interest in imaging.

My big hang-up with the AT92, though, is the lack of a dedicated field flattener or a flattener+reducer combo.

For those that image with the AT92, what do you use for a reducer+flattener combo?

Clear Skies,

Phil



#2 geordanr

geordanr

    Lift Off

  • -----
  • Posts: 13
  • Joined: 02 Nov 2017

Posted 09 November 2019 - 12:07 AM

I use the AT2FF (I don't have a reducer); this is a single 5 minute sub taken with a ASI294MC.  Note that the left side isn't as sharp as the right, probably because I haven't squared up the sensor properly.

Attached Thumbnails

  • crescent_Light_006-St-small.jpg



CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics