Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

REQUEST: tube/body length of Intes MK66/67 OTA

  • Please log in to reply
4 replies to this topic

#1 Van Huynh

Van Huynh

    Explorer 1

  • *****
  • topic starter
  • Posts: 70
  • Joined: 26 May 2007

Posted 11 February 2020 - 03:12 PM

Hi. If you have an Intes MK66/67, would you please measure the body length and let me know? I'm looking for the length of the white tube itself, not including the black ends. Thank you!



#2 photoracer18

photoracer18

    Gemini

  • *****
  • Posts: 3,161
  • Joined: 02 Sep 2013
  • Loc: Martinsburg, WV

Posted 11 February 2020 - 04:49 PM

Some of them are all black.



#3 luxo II

luxo II

    Apollo

  • -----
  • Posts: 1,496
  • Joined: 13 Jan 2017
  • Loc: Sydney, Australia

Posted 11 February 2020 - 05:00 PM

Close to 500mm (I have an M615).

Why do you need to know ?

Edited by luxo II, 11 February 2020 - 05:01 PM.


#4 TONGKW

TONGKW

    Apollo

  • *****
  • Posts: 1,309
  • Joined: 16 Jan 2007

Posted 11 February 2020 - 09:32 PM

﹣﹣﹣﹣﹣﹣

I have just measured mine.
The body of my Intes MK 67 OTA is 7 inches diameter and the length 17.25 inches.
I also have a sketch of the spacing of the optical parts which I think might be of interest to you.

﹣﹣﹣﹣﹣﹣

 

﹣﹣﹣﹣﹣﹣

Attached Thumbnails

  • Intes MK67_Optical spacing.jpg


#5 Van Huynh

Van Huynh

    Explorer 1

  • *****
  • topic starter
  • Posts: 70
  • Joined: 26 May 2007

Posted 11 February 2020 - 10:12 PM

Thanks to the both of you for the replies. I have the same set of optics that I recently purchased from a member here.




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics