Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

TTS-160 Panther Mount - Another Satisfied User

  • Please log in to reply
1 reply to this topic

#1 Junn Chavez

Junn Chavez

    Vostok 1

  • -----
  • topic starter
  • Posts: 183
  • Joined: 24 Feb 2009

Posted 14 February 2020 - 09:55 AM

Hello everyone!

 

This is a review of my TTS-160 Panther mount that I bought last year from Niels Haagh of Track The Stars (www.trackthestars.com). His customer service is excellent and our transaction went ‘smooth as silk’. Except for the 5% customs tax, I didn’t encounter any problems receiving it here in Riyadh, Saudi Arabia. I received it well protected in a box. I assume DHL can drop the box from a second floor and the mount inside will survive because of the meticulous attention to packing.

 

Although a bit heavy for it’s size, the mount is easy to carry and transport using the supplied bags. The craftsmanship, finish and performance of the mount is impeccable. It was worth every riyals I saved just to get this mount. Setup and tear down is a breeze. I can set the tripod, mount and telescope in just a few minutes. The tripod is also a work of art and very sturdy. Unlike other mounts that ‘growl’, my Panther quietly ‘purrs’ when slewing to a target. No neighbors are harmed during my middle-of-the-night evaluation. It carries my heavy TMB 105/650 telescope setup (10 kg/22 lbs) with ease like nothing’s on top of it. The go-to’s are excellent. After a 2-star alignment, the mount always place the selected DSOs in the center of a 12mm Nagler eyepiece (54X). After enjoying the DSOs I decided to test the mount’s tracking ability. I hooked up my Altair 174MM camera and started Al’s Reticle software. I centered Rigel on the CMOS chip and synced on it. To my surprise the star is still in the center after returning from an hour tea break. 

  

The handpad is cute as a button laugh.gif It took me some time to learn and get used to it. But after a while, it’s a joy to use. The mount has two magnets on its arms to attach the handpad. I decided to remove one of the magnet and screw it on my computer table, near the laptop. While sitting, the handpad is accessible and acts like a second computer mouse. In preparation for the December 26, 2019 annular solar eclipse, I did a 1-star alignment on Arcturus around 4:00 AM and parked the mount. Covered my setup with a tarp in case it rains, and went back to bed. The solar eclipse will be partial at my city (Laguna, Philippines). I woke up my mount from its stupor around 11:30 AM and requested a go-to to the Sun. Lo and behold, the Sun is in the center of the CMOS chip. But the clouds didn’t cooperate and I only got three good video clips of the ongoing eclipse. There was a slight drift of the Sun but it stayed in the CMOS chip for a very long time. Good news from Neils that solar and lunar trackings will be available soon as an upgrade. I noticed that at high power (3-6mm Nagler Zoom) the lunar image do not jitter when I move/slew the image.

 

I have successfully controlled the mount using Cartes du Ciel and MegaStar5 using the LX200 protocol. But I will probably use SkyFire 3 in the future. I also ordered the rOTAtor but I am still lightyears away from diving into astrophotography. Right now I am enjoying solar and lunar astrophotograhy.

 

Like others who have commented about the counterweight’s hand screw, I find them a bit sharp too. I use a small face towel whenever I screw/unscrew them to protect my hand. Other than that, the mount for me is perfect.

 

As usual work gets in the way of my hobby and I returned to Riyadh after a 30-day vacation. I left my astro gears and probably will not see them again for six or ten months.

 

Clear skies everyone and thanks for your time. smile.gif

 

Panther 01.jpg

Moon 02.jpg

Eclipse 2.jpg


Edited by Junn Chavez, 15 February 2020 - 04:17 AM.

  • Jeff Morgan, zjc26138, schmeah and 7 others like this

#2 nielshaagh

nielshaagh

    Vendor - Track The Stars

  • -----
  • Vendors
  • Posts: 16
  • Joined: 09 Nov 2013
  • Loc: Ganlose, Denmark

Posted 15 February 2020 - 04:04 AM

Like others who have commented about the counterweight’s hand screw, I find them a bit sharp too.

Thanks for the review.

Concerning the sharp edges on the counterweights hand screws and sharp corners on the dovetail saddle (as reported in an earlier post here on CN) we have now updated these parts and secured that no sharp edges remain.


  • Jeff B, Goodchild and Junn Chavez like this


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics