Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

How to configure SGP with phd2

  • Please log in to reply
1 reply to this topic

#1 joelin

joelin

    Vanguard

  • *****
  • topic starter
  • Posts: 2,342
  • Joined: 14 Jan 2008
  • Loc: Saratoga, CA

Posted 17 February 2020 - 03:21 AM

I have my SGP sequence set up such that it auto loads Phd2 and starts guiding...yay!

However, if Phd2 is already running (from a previous sequence), then I run into issues because SGP is trying to do things is not able to. The log errors to “Phd2 is already open “ in response to set profile and set connected commands from SGP. Then SGP throws out a no auto guide response and ends the sequence.

I’ve found what works is to shut down SGP and Phd2 and then open them again, but is there a way to do it without having to do that?

#2 happylimpet

happylimpet

    Skylab

  • *****
  • Posts: 4,466
  • Joined: 29 Sep 2013
  • Loc: Southampton, UK

Posted 17 February 2020 - 04:45 AM

Yes, install NINA.




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics