Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Synscan eq5 upgrade kit

  • Please log in to reply
1 reply to this topic

#1 MADGRILO

MADGRILO

    Lift Off

  • -----
  • topic starter
  • Posts: 1
  • Joined: 27 Aug 2019

Posted 21 February 2020 - 07:28 PM

Hello everybody.

 

Two months ago i adcquired a synscan upgrade kit in the beginning can't use because it's rainning. But i made some tests without load and everything it's OK. Somedays i have the instance to use and then, when i put the the telescope and the counter weight do the configuration and start 3 star alignament the hand control turn off and reinitialize. So i need help with this situation. if someone had this problem would help me.

 

thanks 



#2 Astrolite

Astrolite

    Viking 1

  • *****
  • Posts: 558
  • Joined: 26 Aug 2017
  • Loc: S. Central Pennsylvania

Posted 23 February 2020 - 06:36 AM

Is it possible that there is a loose connection in the power wire? If the hand controller temporarily looses power it will re-initialize when the power resumes. Beyond that I would talk to Skywatcher.




CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics