Jump to content

  •  

CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.

Photo

Easy Refractor Carry Handle

  • Please log in to reply
16 replies to this topic

#1 eyespy

eyespy

    Vostok 1

  • -----
  • topic starter
  • Posts: 102
  • Joined: 12 Dec 2017
  • Loc: BC Canada

Posted 22 March 2020 - 11:08 AM

Hi,

 

While musing about an easy way to carry my Skywatcher Evostar 102mm F/9.8 refractor, I purchased a spare Dovetail Mounting Plate to match the one already installed on my refractor for tripod mounting purposes.

 

There are two convenient matching 1/4" x 20 tapped mounting holes for accessories etc on top of the tube rings of 'Synta' type refractors.  All that is required are two 3/4" long 1/4" x 20 bolts and two nylon 1/4" thick collars and install the second dovetail plate on the top of the tube rings.  The nylon spacers provide enough space to grip the plate when picking up or carrying your refactor.  I found that it was a safer hold if I attached the plate 'upsidedown' due to the edges of the plate.

 

These plates come in 8" and 13" lengths to match the plates already installed on your refractor so that you can use the existing spare drilled and tapped holes in the rings.

 

The new handle looks good and blends in and looks like it is a part of the telescope.  What handles have other refractor owners used or designed ?

 

Cheers,

 

Doug......

 

 

 

 

Attached Thumbnails

  • image.jpeg
  • image.jpeg

Edited by eyespy, 22 March 2020 - 11:29 AM.

  • payner, m9x18, ryanr256 and 1 other like this

#2 Rocket Ron

Rocket Ron

    Ranger 4

  • *****
  • Posts: 323
  • Joined: 03 Oct 2015
  • Loc: California

Posted 22 March 2020 - 11:21 AM

Here's what I came up with for my Astro Physics telescope: 

 

https://www.cloudyni...ics-telescopes/

 

post-250261-0-94501100-1468113058.jpg


  • payner, m9x18, jerobe and 1 other like this

#3 Cometeer

Cometeer

    Vanguard

  • *****
  • Posts: 2,292
  • Joined: 07 Aug 2013
  • Loc: SF Bay Area, California or Illinois

Posted 22 March 2020 - 11:25 AM

I use the Vixen carry handle. It’s only secured with a single 1/4” bolt, so I wouldn’t trust it for large telescopes because if a telescope is tail heavy, it could swing itself loose from the handle. 
 

47C125C3-2813-4931-92E9-19B51F0151BA.jpeg

 

The new William Optics handles look quite nice. 


  • vkhastro1, m9x18, jerobe and 1 other like this

#4 junomike

junomike

    Hubble

  • *****
  • Moderators
  • Posts: 18,614
  • Joined: 07 Sep 2009
  • Loc: Ontario

Posted 22 March 2020 - 11:26 AM

I use opposing Vixen Saddles as well.  ADM even offers a removable  Handle to attach to the Vixen Dovetail If desired. (Dual Vixen/Losmandy available also)


  • m9x18 and eros312 like this

#5 daquad

daquad

    Surveyor 1

  • *****
  • Posts: 1,602
  • Joined: 14 May 2008

Posted 23 March 2020 - 06:38 PM

Well, I guess if your scope is small enough in length and weight it is OK to place the handle near the center of balance.  But for a longer, heavier scope the handle is better placed at the focuser end so that you can hold the scope by the handle in one hand and cradle the lens end in the other.  Of course, this requires an extra set of tube rings.

 

I also use a Vixen-style dovetail for a handle, but orient it right side up so that I can add accessories on the bar.  

 

Dom Q.

 

DSCN2420.JPG



#6 STE411

STE411

    Explorer 1

  • -----
  • Posts: 67
  • Joined: 04 Aug 2014

Posted 24 March 2020 - 06:33 AM

Hi,

I made this from a drawer pull purchased at Lowe’s for about 5 dollars. It took a couple of hours not counting paint drying time. It works and I think looks pretty good.

steve

Attached Thumbnails

  • B9A74802-9FBE-4FF6-A230-14F158949C98.jpeg

  • m9x18, MJB and sunnyday like this

#7 imtl

imtl

    Ranger 4

  • *****
  • Posts: 315
  • Joined: 07 Jun 2016

Posted 24 March 2020 - 04:52 PM

You should check ES cradle assembly

 

https://telescopes.n...-telescope.html


  • airbleeder likes this

#8 lionel

lionel

    Ranger 4

  • *****
  • Posts: 385
  • Joined: 12 Aug 2007
  • Loc: Delaware

Posted 24 March 2020 - 05:07 PM

The handle on my 130GTX is made of solid leather.  Leather trunk handles made in Maine are available from brettunsvillage.com. They come in different styles and thicknesses and are sold in pairs. I bought a heavy duty version, TH03...over 1/4” thick, 8 1/2” long with 1” long slots at each end. Total cost was $13 including shipping. They’re also available unslotted. I glued my pair back-to-back yielding a final thickness of 5/8”. This provided plenty of rigidity and stiffness to easily manipulate my 22 lb dressed ota.

Leather offers some advantages over metal bar handles. It makes a secure gripping surface for your hand and is comfortable to hold in cold weather.  I think it adds a touch of elegance as well.
The handle in the photo is ten years old and still looks like new. I originally installed it on my SV130EDT triplet and then transferred it to my new GTX two years ago.

Lionel

 

F038D1E4-E2AE-4AC2-B8D6-C818C013097F.jpeg

 


  • m9x18, STE411 and jelloptic like this

#9 Doug Culbertson

Doug Culbertson

    Cosmos

  • *****
  • Posts: 8,111
  • Joined: 06 Jan 2005
  • Loc: N. Florida

Posted 24 March 2020 - 05:21 PM

You should check ES cradle assembly

 

https://telescopes.n...-telescope.html

I actually replaced the tube rings and handle on my APM 140 with the cradle assembly for an ES 152 because the APM handle was too short and put the tube rings too close together. The ES assembly is great. 


  • peleuba and imtl like this

#10 Kunama

Kunama

    Aussie at large

  • *****
  • Posts: 5,469
  • Joined: 22 Oct 2012
  • Loc: Canberra, Australia

Posted 24 March 2020 - 05:59 PM

I made a few handles for my scopes using aluminium bar stock and carbon fibre tubing, my TOA130NFB and TMB-LZOS152 handles pictured below:

Attached Thumbnails

  • MIS_4193.jpg
  • MIS_7657.jpg

  • peleuba, vkhastro1, 3 i Guy and 12 others like this

#11 Kunama

Kunama

    Aussie at large

  • *****
  • Posts: 5,469
  • Joined: 22 Oct 2012
  • Loc: Canberra, Australia

Posted 24 March 2020 - 06:05 PM

and for some extra bling a silver version:

Attached Thumbnails

  • MIS_7380.jpg

Edited by Kunama, 24 March 2020 - 06:08 PM.

  • peleuba, vkhastro1, 3 i Guy and 9 others like this

#12 gwlee

gwlee

    Surveyor 1

  • *****
  • Posts: 1,880
  • Joined: 06 Sep 2015
  • Loc: 38N 120W

Posted 24 March 2020 - 09:36 PM

I find the tube itself makes an adequate handle for a 4-inch or smaller refractor, but perhaps my hands are larger than yours. I am right handed and carry the scope using two hands with my left hand wrapped around the tube’s balance point. My right hand is somewhere near the the scope’s objective end and both hands are pulling the scope in close to my body on my right front quarter with the focuser end of the scope pointing roughly in the direction of travel. If I need to open a door or move something out of the way, I use my right hand, and my left hand never leaves the balance point. 

 

When mounting the scope, my left hand is still wrapped around the tube at the balance point, and my right hand comes off the tube and works the mount’s clamping mechanism. A bit of choreography is required to avoid awkward, what-do-I-do-now moments, but the scope feels secure and under control at all times once the sequence of moves is worked out. Nothing extra needs to be attached to the scope, keeping it as light and compact as possible for grab-and-go astronomy.


Edited by gwlee, 24 March 2020 - 10:39 PM.


#13 rustynpp

rustynpp

    Surveyor 1

  • *****
  • Posts: 1,704
  • Joined: 27 Aug 2004
  • Loc: NYC

Posted 24 March 2020 - 09:45 PM

I think this is cheating since it came stock, but the handle was one of the reasons I chose the WO Zenithstar 103 over many other very nice 4" doublets, so I feel justified in posting it smile.gif Plus I believe you can buy the newer version of the handle direct from WO if you like.

 

2 (CN).jpg


  • peleuba, m9x18, eros312 and 4 others like this

#14 ryanr256

ryanr256

    Ranger 4

  • *****
  • Posts: 331
  • Joined: 21 Apr 2009
  • Loc: Southwest Ohio

Posted 24 March 2020 - 10:35 PM

I picked up one of these for my Stellarvue 102 Access:

 

https://www.teleskop...-Telescope.html

 

 

-Bob


  • m9x18 and eros312 like this

#15 MJB

MJB

    Sputnik

  • *****
  • Posts: 29
  • Joined: 18 Dec 2013

Posted 25 March 2020 - 11:29 AM

Made one from aluminum stock and a door pull handle from the hardware store ... 

 

Mike

FC100DZ.jpg


  • m9x18, daquad and STE411 like this

#16 Rick Duering

Rick Duering

    Explorer 1

  • *****
  • Posts: 81
  • Joined: 17 Nov 2008
  • Loc: South Texas

Posted 25 March 2020 - 12:42 PM

Posted 11 September 2019 - 02:04 PM
I’ve made a couple of these over time. The one inch steel strap and

handle comes from Home Depot. You will have to cut and paint the

strap to fit.  The handle come in either black or silver.

Attached Thumbnails

  • BEAB5374-DF48-4381-A6C2-B41A903121F5.jpeg

  • m9x18 and STE411 like this

#17 aa6ww

aa6ww

    Mercury-Atlas

  • *****
  • Posts: 2,523
  • Joined: 23 Oct 2011
  • Loc: Sacramento, Calif.

Posted 26 March 2020 - 02:32 AM

My Skywatcher 120ED with a simple 4" wide handle from ebay for a few dollars. The rail is just a half in wide piece of aluminum from tube ring to tube ring.

I do this to every scope I have. Its simple and extremely effective.

 

...Ralph

Attached Thumbnails

  • 120 with new rings_sideview2.jpg

  • vkhastro1, MJB and STE411 like this


CNers have asked about a donation box for Cloudy Nights over the years, so here you go. Donation is not required by any means, so please enjoy your stay.


Recent Topics






Cloudy Nights LLC
Cloudy Nights Sponsor: Astronomics